Intelligent four loop digital display control inspection instrument

XMZDBJ-41220Intelligent four loop digital display control inspection instrumentOverview

XMZDBJ-41220Intelligent four loop digital display control inspection instrumentWhen used in conjunction with various sensors and transmitters, it can perform cyclic detection, alarm control, transmission output, data acquisition, and communication of multiple industrial process parameters such as temperature, pressure, liquid level, flow rate, and weight. Includes XMZD-2~16 channel inspection instrument series.

XMZDBJ-41220Intelligent four loop digital display control inspection instrumentMain technical indicators

This series of instruments is suitable for the cyclic detection, display, and control alarm of shaft temperature, pipeline air temperature, furnace temperature, and various process quantities such as pressure and flow rate of various equipment. The instruments have 2-16 inspection channels

This series of instruments adopts a digital calibration system for precise and stable measurement

When inputting standard signals, the display range can be programmed for each cycle point

Using non-volatile memory for power failure protection, parameters can be reliably stored for a long time

The instrument adopts a fully open user customizable interface

The instrument maintains the output of the control relay at the position before the occurrence of resistance and coupling breakage due to the phenomenon of resistance and coupling breakage

The instrument has four alarm relay outputs, which can be set as a unified alarm or separately set as alarms

The instrument has a channel alarm, which means that only when one or a few channels of the instrument generate an alarm, the relay will activate

The instrument has an extended alarm, which means that if the instrument is under eight circuit patrol detection, each channel can have two sets of relay outputs. For sixteen circuit detection, each channel can have one set of relay outputs

Input signal: Resistance signal: Pt100, Cu50, Cu100, BA1, BA2, G or remote pressure resistor, etc

Electric couple signals: K, E, S, B, J, T, EA-2, N-type, etc

Voltage signal: 0-5V.DC, 1-5V.DC, 0-20mV.DC, 0-200mV.DC, etc

Current signal: 0-10mA.DC, 4-20mA.DC, etc

Measurement accuracy: ± 0.2% FS ± 1d or ± 0.5% FS ± 1d, resolution: ± 1d

Display mode: 4-digit 0.8-inch or 0.56-inch ultra high brightness LED display, LED working status display

Analog transmission output: 0-10mA. DC load ≤ 1K Ω, 4-20mA. DC load ≤ 500 Ω
0-5V. DC and 1-5V. DC require a load of ≥ 250K Ω

Switching output: Relay output AC220V 3A non inductive load

Alarm mode: can be set according to needs

Usage environment: ambient temperature 0-50 ℃, relative humidity: below 85% RH, avoid strong corrosive gases

Power supply: Conventional type: Switching power supply: 90-260V.AC, 50Hz/60Hz

Special type: Linear power supply: 190-240V AC, 50Hz ± 2Hz

DC power supply voltage: 24V, DC ± 2V

Power consumption: approximately 5W

Weight: Approximately 0.5kg

Instrument structure below 16 channels: Appearance: 160 × 80 × 120mm 80 × 160 × 120mm 96 × 96 × 105mm
Hole: 152 × 76mm, 76 × 152mm, 92 × 92mm

XMZDBJ-41220Intelligent four loop digital display control inspection instrumentPrecautions

When storing instruments in the warehouse, they should be placed in a dry, ventilated, and non corrosive gas environment, and the ambient temperature and humidity should meet the technical requirements.

If the instrument damage is caused by the manufacturer's manufacturing problem, it will be repaired free of charge by the manufacturer. If it is due to improper storage or use by the user, it will be handled according to the actual situation.

The instrument is guaranteed for 18 months from the date of delivery. After the warranty period expires, our factory can also provide customer repair or on-site service.

The selection sample of XMZD-2~16 channel intelligent digital display control inspection instrument can be requested by letter!