JHSB submersible pump flat cable 3 * 16 cable 300/500V

JHSB submersible pump flat cable 3 * 16 cable 300/500VJ

Waterproof rubber sleeve flexible cable product description

Model Name Section mm2The main purpose of implementing core count standards is

JHS 300/500VWaterproof rubber sheathed cables for submersible motors and below

4、6、10、16、25、35 、50、70、95、120, 150, 185, 240

TL/Q 13-91Connect AC voltage300/500VFor front water motors and below, one end of the waterproof rubber sheathed cable is submerged in water, and the long-term allowable working temperature does not exceed65℃

JHSB submersible pump flat cable 3 * 16 cable 300/500VJHSBFlat waterproof rubber sheathed cable for submersible motors

4、6、10、16、25、35 、50、70The95

TL/J 13-91Suitable for transmitting electricity through water and electricity pumps before drainage, with a long-term allowable working temperature not exceeding85℃

Supply AC voltage500VTransmission of electrical energy on submersible motors up to and including. Under long-term immersion and high water pressure, it has good electrical insulation performance.

In China's cable market, it is a relatively large economic group. With the large-scale development of China's industrial industry, the demand for rubber sheathed cable products is increasing day by day. Rubber sheathed cable manufacturers grasp the market development trend, research and develop new products that meet market demand, and achieve high levels of durability, transmission stability, and other aspects of their products. If rubber cable manufacturers want to expand and strengthen their enterprises, they cannot be limited to the current development level. We should increase cooperation with scientific research institutions, utilize the power of scientific knowledge, and improve the performance and quality of products. Only with a long-term leadership perspective can rubber cable manufacturers develop their scale to a higher level.

Silver Shun brand rubber sheathed flexible cable for coal minesSilver Shun brand rubber sheathed flexible cable for coal mines

Structural characteristics of mining rubber sheathed cables:
1： The flexibility requirements for the conductive core of mining cables are for drill cables and mining machine cableszuiHigh; The following measures are taken for the wire structure:
1Using softer small-diameter copper single wires, bundled and twisted at small intervals. The bending and twisting properties of the entire cable are also affected by the insulation and sheath structure, so it cannot be assumed that the finer the single wire, the smaller the pitch, the better.
2， The use of co directional bundle twisting and compound twisting can improve flexibility.
3In order to facilitate the relative sliding of wires in the insulation layer and facilitate installation and maintenance. The single wire of drill cables and small section mining machine cables should be tinned, and the large section mining machine cables should be insulated with paper tape outside the wire.
2： Insulation layer Require sufficient electrical insulation performance
1， Adopting a glue content of not less than one percent35The rubber
2The insulation thickness is thicker than that of general rubber sheathed cables
3， Using rubber with good electrical properties and adopting good extrusion technology (such as extrusion vulcanization continuous production line)
3： Layer
The use of semiconducting rubber as a layer should ensure that its transition resistance meets the standard requirements to ensure reliable operation of the relay protection system in case of accidents.
4： Pad core
1， The cushion core should fully serve as a buffer when the cable is subjected to impact or compression, while not being too large in outer diameter. Require a reasonable design to fill the gaps between insulated core wires.
2， The mechanical performance should not be lower than the requirements of insulating rubber.
3， Cannot adhere to the insulated wire core.
5： Cable structure
1， To improve the flexibility of the cable, smaller pitch multiples should be used.
2， To ensure the mechanical strength of the ground wire core, the cross-section of the ground wire core is larger than that of general cables. For small cross-section products, the same cross-section as the main conduit is used.
3， The control core is first individually twisted into a group, and then combined with the main core to form a cable.
6： Protective layer
1， Require sufficient mechanical strength and good wear resistance. Underground cables require flame retardancy. Therefore, chloroprene rubber is used, and the rubber content is not less than 50%.
2，6KVMobile rubber sheathed cables require sufficient electrical insulation of the sheath to improve its resistance to corona cracking.

JHS-1 * 95 submersible pump cable JHS waterproof cable 1 * 70 quotationWaterproof rubber sheathed flexible cable for 300/500V and below submersible motors is used to connect AC voltage 300/500V and below submersible motors. One end of the cable is in water, and the long-term allowable working temperature does not exceed 65 ℃. JHS 6KV submersible motor waterproof rubber sheathed flexible cable is suitable for 6KV drainage submersible pump power transmission, and the long-term allowable working temperature does not exceed 60 ℃

1.1 Used for JHS waterproof cables with a temperature not exceeding 85 ℃

Waterproof rubber sheathed cables are used for transmitting electrical energy on submersible motors with AC voltage of 500V and below.

JHS-1 * 95 submersible pump cable JHS waterproof cable 1 * 70 quotation1.2 JHSWaterproof cable usage conditions

The cable is allowed to work at a temperature of 65 ℃ for a long time.

JHS waterproof cable specifications: number of cores x section/mm2 single core three core four core -3 × 2.5 3 × 2.5+1 × 1.5 1 × 4 3 × 4 3 × 4+1 × 2.5 1 × 6 3 × 6 3 × 6+1 × 4 1 × 10 3 × 10 3 × 10+1 × 6 1 × 16 3 × 16 3 × 16+1 × 6 1 × 25 3 × 25+1 × 6 1 × 35 3 × 35+1 × 6 1 × 50--1 × 70

JHS waterproof cable insulation material: waterproof rubber is used for insulation; Waterproof rubber is also used for cable filling; The cable sheath adopts waterproof rubber sheath, which is suitable for water treatment equipment such as submersible pumps, coal mines, underwater operations, and underwater landscape lights. This product uses high-density rubber with waterproof and other functions.National standard HYA100 * 2 * 0.5 communication cable price

Detailed information on the number of pairs of HYA local communication cables:
Communication cable | Large logarithmic cable | Voice cable | Audio cable | Local telephone cable | Abbreviated telephone cable
Model HYA pairs 5 pairs 10 pairs 20 pairs 30 pairs 50 pairs 100 pairs 200 pairs 300 pairs 400 pairs 500 pairs 600 pairs 800 pairs 1000 pairs
The wire diameter is 0.40, 0.50, 0.60 (mm).
HYA； HYA22； HYA23； HYA53； ZRC-HYA； ZRC-HYA53； WDZ-HYA；
充油通信电缆： HYAT； HYAT23； HYAT53； HYAT22； HYYT； ZRC-HYAT； WDZ-HYAT； ZR-HYAT53；
Self supporting communication cable - Cableway communication cable model: HYAC, HYYC
铠装通信电缆； HYA22； HYA23； HYA53； HYAT22； HYAT23； HYAT53； ZRC-HYA53； WDZ-HYA53； ZR-HYA23； ZR-HYAT23
Indoor office cable - wiring cable - HPPVV22; HYV； HPVV； HPYV； HPYV22； HYV22
National standard HYA100 * 2 * 0.5 communication cable priceImplementation standard for urban communication cables: YD/T322-1996
HYA urban communication cable (widely used in the construction of metropolitan area network communication networks, mainly installed overhead and in pipelines, mainly transmitting audio signals) HYAT filled communication cable (used in the construction of metropolitan area network communication networks, mainly installed in pipelines, with water blocking effect, no need for inflation protection, mainly transmitting audio signals) HYAC self-supporting communication cable (used in the construction of metropolitan area network communication networks, installed overhead, easy to construct, mainly transmitting audio signals) HYAT53 filled armored cable (used in the complex environment of metropolitan area network communication network construction, directly buried underground, with water blocking and anti rodent bite effect, no need for inflation protection, mainly transmitting audio signals)

Product Description: Our factory produces communication cables suitable for fixed installation, overhead or underground in the city
HYA: Copper core solid polyolefin insulated moisture-proof layer polyethylene sheathed urban communication cable
HYAT: Copper core solid polyolefin insulated filled moisture-proof layer polyethylene sheathed urban communication cable
HYAC: Copper core solid polyolefin insulated self-supporting moisture barrier layer polyethylene sheathed urban communication cable
HYA53: Copper core solid polyolefin insulation, moisture barrier layer, polyethylene sheath, steel plastic tape armor, polyethylene sheath, urban communication cable
HYAT53: Copper core solid polyolefin insulation filled moisture-proof layer polyethylene sheath steel plastic tape armored polyethylene sheath urban communication cable
HYA22: Copper core solid polyolefin insulation, moisture barrier layer, polyethylene sheath, steel tape armor, polyvinyl chloride sheath, urban communication cable
HYA23: Copper core solid polyolefin insulation, moisture barrier layer, polyethylene sheath, steel tape armor, polyethylene sheath, urban communication cable
HYAT22: Copper core solid polyolefin insulated filled moisture-proof layer polyethylene sheathed steel tape armored polyvinyl chloride sheathed urban communication cable
HYAT23: Copper core solid polyolefin insulated filled moisture-proof layer polyethylene sheathed steel tape armored polyethylene sheathed urban communication cable
Purpose:Self supporting non filled cables are suitable for urban and rural telecommunications lines in local telecommunications networks, as well as network cables for accessing public networksThe hanging wire and cable use the same outer protective layer, which is economical, practical, and easy to install and lay. Under environmental conditions ranging from 30 ° C to 60 ° C, the mechanical and electrical properties of the cable remain unchanged.
Structure: Wire: Annealed bare copper wire with diameters of 0.32, 0.4, 0.50, 0.60, 0.70, 0.80, 0.90mm.
Insulation material: high-density polyethylene or ethylene/propylene copolymer, the color of the insulation wire meets the full chromatographic standard.

Manufacturer processing MKVVP mining control cable 450/750v-12 * 4

Control cable model and name:
KVV copper core PVC insulated PVC sheathed control cable
KVVP copper core PVC insulated PVC sheathed braided shielded control cable
KVVP2 copper core PVC insulated PVC sheathed copper tape shielded control cable
KVV32 copper core PVC insulated PVC sheathed steel wire armored control cable
KVVR copper core PVC insulated PVC sheathed control flexible cable
KVVRP copper core PVC insulated PVC sheathed braided shielding control flexible cable
KVVP-32 copper core PVC insulated PVC sheathed copper wire braided shielding steel wire armored control cable
KVVP2-32 copper core PVC insulated PVC sheathed copper tape shielded steel wire armored control cable
KYJV cross-linked polyethylene insulated polyvinyl chloride sheathed control cable
KYJV22 cross-linked polyethylene insulated polyvinyl chloride sheathed steel tape armored control cable
KYJV32 cross-linked polyethylene insulated polyvinyl chloride sheathed fine steel wire armored control cable
KYJVP Cross linked Polyethylene Insulated PVC Sheath Braided Shielded Control Cable
KYJVP22 Cross linked Polyethylene Insulated PVC Sheath Braided Shielded Armored Steel Strip Control Cable
KYJVP2 cross-linked polyethylene insulated polyvinyl chloride sheathed copper tape shielded control cable
KYJVP2-22 Cross linked polyethylene insulated polyvinyl chloride sheathed copper tape shielded armored steel tape control cable
KYJVR cross-linked polyethylene insulated polyvinyl chloride sheathed control flexible cable
KYJVRP cross-linked polyethylene insulated polyvinyl chloride sheathed braided shielding control flexible cable
ZR-KYJV cross-linked polyethylene insulated polyvinyl chloride sheathed flame-retardant control cable
ZR-KYJV22 cross-linked polyethylene insulated PVC sheathed steel tape armored flame-retardant control cable

Manufacturer processing MKVVP mining control cable 450/750v-12 * 4

Main processes of wires and cables
power cable
Wire and cable are produced through three processes: drawing, twisting, and wrapping. The more complex the model specifications, the higher the repeatability.
1. Drawing
In metal pressure processing The technical processing method of forcibly passing metal through a mold (pressure wheel) under external force, compressing the cross-sectional area of the metal, and obtaining the required cross-sectional area shape and size is called metal drawing.
The drawing process is divided into single wire drawing and twisting drawing.
2. Twisting
In order to improve the flexibility and integrity of wires and cables, twisting two or more single wires together in the specified direction is called twisting.
The twisting process includes conductor twisting, cabling, weaving, steel wire armor, and winding.
3. Covering
According to different performance requirements for wires and cables, the equipment used is wrapped with different materials on the outside of the conductor. The wrapping process is divided into:
A. Squeezing: Materials such as rubber, plastic, lead, aluminum, etc.
B. Vertical package: rubber, wrinkled aluminum strip material.
C. Wrapping: Ribbon paper tape, mica tape, alkali free glass fiber tape, non-woven fabric, plastic tape, etc., linear fiber materials such as cotton yarn and silk