JXB-C series reading microscope

1、 Purpose:

Reading microscope is an optical metrology instrument with a simple structure, easy operation, and a wide range of applications. Its main uses are as follows:

1. Perform length measurement. Such as fixed hole spacing. The distance between the base surface and the engraved line, the width of the engraved line, and the diameter of the outer circle of the through-hole.

2. Expand the scope of use of general microscopes to measure in different directions.

3. As an observation microscope, it can distinguish ore specimens and inspect printing photographic plates. Due to the ability of the measuring frame to detach from the base, it can be fixed on the machine tool for direct inspection of machined parts. So this instrument is widely used in inspection rooms and laboratories of mechanical, metallurgical, optical, scientific research and other units.

2、 Technical specifications

1. Optical system performance

2. Measurement device specifications:

Measurement range: 0~50mm

Micro drum grid value: 0.01mm;

3. Measurement accuracy: 0.015mm;

4. Main dimensions of the instrument

The maximum distance between the measuring table and the objective lens: 3X not less than 150mm, 8X not less than 130mm;

5. Instrument dimensions: 227X178X252mm;

6. Net weight of the instrument: 5.5Kg.

3、 System Introduction:

Computerized reading microscopes not only have the functions of traditional reading microscopes, but also have computer processing capabilities. This system is very convenient for observing the image of the workpiece on the computer monitor screen, facilitating measurement and reducing errors, making it an ideal instrument.

4、 Instrument composition:

1. Reading microscope 2. Electronic eyepiece 3. Computer (optional)