JZ-2100 Integrated Intelligent Distillation Instrument

JZ-2100 Integrated Intelligent Distillation InstrumentThe high-end version is a new intelligent distillation treatment device that integrates constant temperature heating, automatic control of distillation endpoint, and cooling water circulation according to the laboratory distillation pretreatment operating procedures. This instrument has tested functions such as precise temperature control, automatic anti backflow suction, uniform heating, anti boiling, and intelligent endpoint control. Easy to use, energy-saving and environmentally friendly. After comparison and verification of distillation recovery rates in the metrology certification laboratory, the results are accurate and reliable, with a recovery rate ofMore than 95%.
This instrument can be widely used in various chemical laboratories that require distillation treatment, such as environmental protection, disease control, aquaculture, water supply and drainage, universities, research institutes, factories, and mining enterprises. It can be used for distillation treatment of volatile phenols, cyanides, ammonia nitrogen, and moisture in Kjeldahl nitrogen oil, as well as distillation experiments for residual sulfur dioxide in food. There are no restrictions on receiving bottles.
execution standard
water quality Determination of volatile phenols4-aminoantipyrine spectrophotometric method (HJ 503-2009)
water quality Determination of Cyanide Capacity method and spectrophotometric method（HJ 484—2009 ）
water qualityDetermination of Ammonia Nitrogen Distillation Neutralization Titration Method (HJ 537-2009)
soil Determination of Cyanide and Total Cyanide Spectrophotometric method（HJ 745-2015）
Heating system:
Heating method: Adopting imported far-infrared ceramic heating furnace, the heating power is more stable, the thermal conductivity is better, and infrared radiation heating (no open flame heating, waterproof) is used,
Install a thermal insulation cover to prevent heat loss and ensure more uniform heating of the sample.
Single hole heating power:0-800W (single hole adjustable);
Intelligent endpoint control:
Distillation endpoint control: The distillation endpoint is controlled by a pressure weighing sensor, and the distillation volume weight can be set arbitrarily. The heating is automatically stopped, and an alarm is triggered by a light after the distillation is completed. The entire experimental process does not require personnel supervision and has a high degree of automation;
Distillation weight setting range1-500g（ml），
Cooling system:
Closed internal circulation reflux system, built-in air cooling system, no need for external cooling water source,
Wind cold water cold+Equipped with a built-in compressor for dual cooling, suitable for continuous operation of large quantities of samples!
Compressor cooling capacity:1700W
Temperature range:Adjustable from 5 ℃ to 35 ℃
Anti reverse suction: equipped with anti vacuum solenoid valve, with anti reverse suction function for evaporated liquid;
Receiver device: The receiver device is not restricted and is configured by default as a volumetric flask receiver. Other containers can be replaced according to experimental requirements for receiving, and the tray can be flexibly configured;
Main technical indicators:

Display mode:7-inch color touch screen
Heating unit:6, single hole single control;
Heating time:5-8min；
Distillation speed:2-12ml/min；
Time control:0-200min adjustable;
Maximum heating power:2400W-3600-4800W (adjustable);
Distillation flask specifications:500mlX6250 X6 or more specifications are available for selection;
rated voltage/Frequency: 220V/50HZ;
Instrument size:900 (length) x 450 (width) x 800 (height) mm.