Jacketed magnetic flap level gauge

Jacketed magnetic flap level gaugeIt uses a magnetic float as the measuring element and a magnetic steel driven flip column display, without the need for energy. Suitable for various environments ranging from low temperature to high temperature, vacuum to high pressure, etc. It is an ideal liquid level measurement product for industries such as petroleum and chemical. Configure upper and lower limit switch outputs to achieve remote alarm and limit control. Configure the transmitter to achieve remote indication, detection, and control of liquid level.

Structural principle:

Jacketed magnetic flap level gaugeIt is a novel insulation liquid level detection instrument that uses steam jacket, circulating water jacket, and vacuum jacket to keep the liquid working at a certain temperature. Suitable for liquid level measurement in petroleum, chemical and other systems that require antifreeze, insulation and heating.
The liquid level gauge indicates clearly and is easy to observe. The on-site indication form is a red and white flip column. If equipped with resistance type, current type, switch type remote transmission matching instruments produced by our factory, or connected to DCS, PLC systems, or equipped with intelligent light column digital display control instruments, remote detection, control, and alarm can be more conveniently achieved.

Jacketed magnetic flap level gaugeMain technical indicators:

1. Range (mm): 300-81000;
2. Medium density (g/cm3): 0.5-2;
3. Medium viscosity: ≤ 0.02Pa.S;
4. Working temperature ℃: -40~350;
5. Pressure rating (MPa): ≤ 32;
6. Measurement accuracy (mm): ≤± 10;
7. Installation methods: side mounted, top mounted, bottom mounted;
8. Protection level: IP65;
9. Explosion proof level: ib Ⅱ CT4 (intrinsic safety type), d Ⅱ BT4 (explosion-proof type);
10. Transmission mode: 4-20mA or switch quantity;
11. Interface flange: PN4.0 DN25 HG20593 (side mounted) PN1.0 DN100 HG20593 (top mounted, bottom mounted), can be specially customized according to user needs. Note: When the installation of the level gauge is affected by the environment and the spatial position L1<300 is ordered, it should be clearly stated.