Jetstream hybrid dispersing emulsifier

The Jetstream high shear dispersing emulsifier efficiently, quickly, and uniformly distributes one or more phases into another continuous phase. Under normal circumstances, each phase is immiscible with each other. Due to the high tangential velocity generated by the high-speed rotation of the rotor and the strong kinetic energy brought by high-frequency mechanical effects, the material is subjected to strong mechanical and hydraulic shear, centrifugal extrusion, liquid layer friction, impact tearing, and turbulence in the narrow gap between the stator and rotor. Thus, the immiscible solid, liquid, and gas phases are dispersed and emulsified uniformly and finely in an instant under the joint action of corresponding mature processes and appropriate additives. After high-frequency cyclic cycles, stable high-quality products are finally obtained.

Under the centrifugal force generated by the high-speed rotating rotor, the material in the figure is simultaneously sucked into the working chamber from the upper and lower feeding areas of the working head in the axial direction.
The strong centrifugal force throws the material radially into the narrow and precise gap between the stator and rotor. Simultaneously subjected to centrifugal compression, impact and other forces, the material is initially dispersed and emulsified.
Generate a linear velocity of at least 15m/s and up to 40m/s at the outer end of the high-speed rotating rotor, and form strong mechanical and hydraulic shear, liquid layer friction, and impact tearing. Fully disperse, emulsify, homogenize, crush, and simultaneously inject the material through the stator slot.
The material is continuously ejected from the radial direction at high speed, changing its flow direction under the resistance of the material itself and the container wall. At the same time, under the action of the upper and lower axial suction forces generated in the rotor area, two strong turbulent flows are formed, one above and one below. The material undergoes several cycles and finally completes the processes of dispersion, emulsification, and homogenization.

model Model	Power (Kw) Power	Speed (r/min) Rotation speed	Processing capacity (L) Handling Capacity
TRH-J-80	1.5	2900	20-100
TRH-J-100	2.2	2900	50-300
TRH-J-120	4	2900	100-500
TRH-J-140	5.5	2900	200-800
	7.5	2900
TRH-J-160	11	2900	300-1000
	15	2900
TRH-J-180	18.5	2900	500-1500
TRH-J-200	22	1450	800-2000
TRH-J-220	30	1450	1000-3000
TRH-J-240	37	1450	1500-5000
TRH-J-270	55	1450	2000-8000
TRH-J-290	75	1450	3000-10000

Fine Chemicals: (pigments, adhesives, sealants, resin emulsions, fungicides, coagulants)
Petrochemical industry: (lubricating grease, diesel emulsification, asphalt modification, catalyst, paraffin emulsification)
Biopharmaceuticals: (injections, antibiotics, ointments, biologics, microencapsulated emulsified sugar coatings)
Paint and Ink: (Printing Ink, Latex Paint, Architectural Paint, Automotive Paint, Coating Additives)
Pesticides: (fungicides, seed coating agents, herbicides, pesticide emulsions, fertilizers, biopesticides)
Nanomaterials: (dispersion and depolymerization of nanomaterials, reaction extraction of nanomaterials)
Food industry: (fruit juice, jam, jelly, ice cream, dairy products, additives, tea beverages)
Daily chemical products: (detergent, shampoo, face cream, lipstick, facial cleanser, daily essence)
Paper making: (pulp, adhesive, rosin emulsion, papermaking additives, resin emulsion)