Jiasu L-650V Two Axis Rail Vertical Lathe, CNC Vertical Lathe

NegotiableUpdate on 01/12

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Product Features Parameter Configuration Customer Case Product Agent Contact Us 1. The bed body is made of advanced resin sand casting and box structure design and manufacturing. After aging treatment to eliminate internal stress, the material is tough. In addition, the box structure design and high rigidity body structure make the lathe have sufficient rigidity and strength. The whole machine shows the characteristics of cutting resistance and high precision

Product Details

Product Features
parameter configuration
Customer Case
Product Agency
Contact Us

1. Bed frame

Made by advanced resin sand casting and box structure design, the lathe is treated with aging to eliminate internal stress, and the material is tough. Combined with box structure design and high rigidity body structure, the lathe has sufficient rigidity and strength to demonstrate cutting resistance and high precision.

2. Transmission shaft
The X/Y axis adopts high-precision double nut preloaded precision ball screws, combined with the locking and pulling design of the support seats at both ends, which can eliminate the transmission backlash and pre compensate for the errors caused by temperature rise, ensuring positioning accuracy.

3. Screw rod
　　 The X/Y axis adopts high-precision double nut preloaded precision ball screws, combined with the locking and pulling design of the support seats at both ends, which can eliminate the transmission backlash and pre compensate for the errors caused by temperature rise, ensuring positioning accuracy.

4. Spindle motor
By using a high-speed motor, the CNC lathe has excellent performance in high-speed, low-speed, light and heavy cutting (with a power of up to 11/15 KW).

5. Electrical box
The electrical box is equipped with a heat exchanger to ensure system stability, and the external wiring part has protective coils that can withstand heat and oil and water.

6. Lubrication system
The automatic depressurization lubrication system provides centralized oil supply, with an advanced depressurization intermittent oil supply system that provides timely and appropriate oil supply to each lubrication point in a timed, quantitative, constant pressure, and individual manner, ensuring that each lubrication position receives lubricating oil at the right time, allowing the CNC lathe to operate for a long time without any worries.

7. Fully dense sheet metal
Under the strong requirements of environmental protection and operator safety, Jiasu Precision Machinery focuses on the design of Jiasu L-650V vertical CNC lathe sheet metal, emphasizing aesthetic appearance, environmental protection, and ergonomic compliance. The fully sealed sheet metal design completely prevents cutting fluid and cutting fluid splashing outside the CNC lathe, keeping the surroundings of the CNC lathe clean.

Product model:	Jiasu L-650V
Processing capability
Maximum turning diameter on the bed:	780
Maximum turning diameter:	650
Maximum turning length:	550
Maximum workpiece weight:	250kg
Spindle
Specification of spindle nose end:	A2-8
Specification of spindle chuck:	11'
Maximum spindle speed:	2000
Feed axis
X/Z-axis travel:	330/600mm
X/Z-axis fast movement speed:	20/20m/min
X/Z-axis screw specifications:	4010/4010
Positioning accuracy: (GB/T18400.4)	0.01
Repetitive positioning accuracy: (GB/T18400.4)	0.007
electric machinery
Spindle motor power:	15/18.5 kw
X/Z-axis motor power:	2.5/2.5kw
Cooling motor power:	0.49kw
Hydraulic station motor power:	3HP
Tool changing system
Type of tool change:	Hydraulic turret
Knife tower model:	Y200
Number of knife positions:	10
Standard tool holder size:	25X25mm
Standard boring bar diameter:	φ32mm
General specifications
Power capacity:	25KVA
Dimensions (length X width X height):	2/1.8/2m
Net weight (approximately):	4.8T

Standard configuration:

1. FANUC/Mitsubishi/New Generation Controller from Japan
2. Electrical box heat exchanger
3. Standard RS-232 interface
4. RS-232 transmission cable
5. Hydraulic three jaw chuck
6. Fully sealed splash proof device
7. Automatic centralized lubrication system
8. Work lighting
9. Work status indicator light
11. Three phase isolation transformer
12. Toolbox
13. Basic adjustment screws and washers
14. Operating instructions

Select configuration:

1. Guangzhou CNC GSK controller
2. Main spindle C-axis control system
3. Spindle positioning brake device
4. Power turret device
5. Elevating chip conveyor with chip collection vehicle