Jiasu V-640ZS three-axis rail double exchange platform drilling center

1. lathe bed
Made by advanced resin sand casting and box structure design, the material is tough after aging treatment to eliminate internal stress. Combined with box structure design and high rigidity body structure, the machining center has sufficient rigidity and strength, demonstrating the characteristics of cutting resistance and high precision of the whole machine.

2. Transmission shaft
The X/Y/Z axis adopts a linear track sliding rail design. The column, saddle, head, and base are made of advanced resin sand casting and box structure design and manufacturing. The configuration of ribs is strengthened through computer analysis to improve rigidity and stability.

3. Screw rod
The three-axis adopts high-precision double nut preloaded precision ball screws, combined with locking and pulling design of the support seats at both ends, which can eliminate transmission backlash and pre compensate for errors caused by temperature rise, ensuring positioning accuracy.

4. Spindle motor
By using a high-speed motor, the machining center has excellent performance in high-speed, low-speed, light and heavy cutting (power up to 5.5/7.5 KW).

5. Spindle head
Adopting a high-precision and high rigidity spindle head, it can withstand heavy cutting and long-term heavy cutting of radial and axial loads, and can maintain high precision in machining over time.

6. Knife magazine (optional)
　　Adopting a conical/disc-shaped tool magazine, it provides fast, smooth, and reliable tool exchange actions, controlled by PLC software for fast and rapid tool exchange actions, reducing non cutting time.

7. Electrical box
The electrical box is equipped with a heat exchanger to ensure system stability, and the external wiring part has protective coils that can withstand heat and oil and water.

8. Lubrication system
Adopting an automatic depressurization lubrication system for centralized oil supply, and an advanced depressurization intermittent oil supply system, timely and appropriate oil supply is provided to each lubrication point in a timed, quantitative, constant pressure, and individual manner, ensuring that each lubrication position receives lubricating oil at the right time and ensuring worry free operation of the machining center for a long time.

9. Fully dense sheet metal

Under the strong requirements of environmental protection and operator safety, Jiasu Precision Machinery focuses on the design of V-600ZS vertical machining center sheet metal, emphasizing aesthetic appearance, environmental protection, and ergonomic compliance. The fully sealed sheet metal design completely prevents cutting fluid and cutting fluid splashing outside the machining center, keeping the surroundings of the machining center clean.

Product model: V-640ZS Workbench (roller track) Workbench size: 600 * 500 (dual exchange workbench) T-slot specifications: M12*100 Maximum load: 2*200Kg trip X/Y/Z axis maximum stroke: 600/450/350（500） Distance from spindle nose to worktable: 100～450（60~560） Distance from spindle center to column surface: 450 Spindle Spindle taper hole: BT30（BT40） Maximum spindle speed (standard): 12000（8000）rpm Main shaft transmission mode (standard): Direct connection (synchronous belt) Spindle transmission mode (optional): Electric spindle/15000/2000/24000rpm Feed rate Three axis cutting feed rate: 10000mm/min Three axis fast moving speed: 36/36/36m/min Ball screw specifications: 3216 Knife storage compartment (optional) Knife magazine form: Clamp arm type Tool capacity: 16 Maximum diameter of cutting tool X length: 60X200 Maximum weight of cutting tool: 3kg Knife handle specifications: BT30 Tool change time (knife to knife): 1.2 seconds Servo motor Spindle motor: 5.5/7.5（7.5/11）kw X/Y/Z-axis motor (Mitsubishi): 1.5/1.5/2.2kw X/Y/Z-axis motor (FANUC): 1.8/1.8/1.8kw X/Y/Z-axis motors (wide range): 2.0/2.0/2.0kw Cooling motor: 0.49kw General specifications Gas source requirements: 8KG Power capacity: 15KVA Dimensions (length X width X height): 2.8/3/2.4m Net weight (approximately): 3.5T Standard configuration: 1. Japanese FANUC/Mitsubishi controller 2. Electrical box heat exchanger 3. Standard RS-232 interface 4. RS-232 transmission cable 5. Surrounding sheet metal 6. Automatic centralized lubrication system 7. Rigid tapping of spindle teeth 8. Work lighting 9. Work status indicator light 10. Three phase isolation transformer 11. Toolbox 12. Basic adjustment screws and washers 13. Operating instructions Select configuration: 1. Guangzhou CNC GSK controller 2. Elevating chip conveyor with chip collection vehicle 3. Spindle oil cooling device 4. Fully automatic voltage regulator 5. CNC rotary table (fourth and fifth axes) 6. Oil mist filter

The product adopts a sales strategy of agency, and we are now recruiting domestic and foreign agents interested in joining the CNC machine tool industry. The company will fully respect and protect the rights and interests of CNC machine tool agents, and provide comprehensive technical guidance and after-sales service support

1. Product price: Pricing based on specific customer configurations
２. Logistics costs: negotiable
３. If you need more specific information, please contact us. Jiasu Precision Machinery will be happy to serve you