Jimen torsion testing machine

This machine is used for testing the low-temperature resistance performance of rubber. It uses a compressor to provide a constant low-temperature environment and can heat up according to the set heating rate. The cooling medium is alcohol (provided by the customer), which is used to evaluate the low-temperature resistance of rubber through the machine's dedicated torsional power system, torsional angle measurement system, temperature control system, and programmable software calculation system. The torsional stiffness, torsional modulus, and corresponding temperature of rubber are measured at low temperatures.

GB/T 6036

Number of sample groups: 3 or 6 groups
According to the standard: GB/T 6036
Sample specifications: 40.0mm soil 2.5mm, width 3.0mm ± 0.2mm, thickness 2.0mm ± 0.2mm
Test temperature: Room temperature~-75 ℃, the standard requires the lowest temperature test point for compressor refrigeration to be -73 ℃
Refrigeration method: Compressor refrigeration
Temperature control accuracy: ± 1 ℃
Heating rate: Heat up at intervals of 5 ℃ or 1 ℃, with each heating taking about 5 minutes
Twist angle: 0-180 ° adjustable, angle resolution: 0.01 °
Twisted steel wire: This steel wire is made of tempered spring steel wire, with a length of 65mm ± 8mm. The torsion constants of the steel wire are 0.7mN • m, 2.8mN • m, and 11.2mN • m, respectively
Control system: controlled by dedicated computer software

rubber