K-type handle armored thermocouple

NegotiableUpdate on 12/19

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

K-type handle type armored thermocouples can generally measure the surface or internal temperature of gases, liquids, vapors, and solids within the range of 0-950 ℃. They can be paired with digital instruments, recording and regulating instruments PLC、 As a new generation of temperature sensors, data collectors or computers can be widely used in various departments such as metallurgy, petroleum, chemical, power, light industry, textile, food, national defense, and scientific research. It has the advantages of bending, high pressure resistance, fast thermal response time, and durability

Product Details

【 Product Introduction 】 K-type handle armored thermocoupleGenerally, it can measure the surface or internal temperature of gases, liquids, vapors, and solids within the range of 0-950 ℃, and can be equipped with digital instruments, recording and regulating instruments PLC、 As a new generation of temperature sensors, data collectors or computers can be widely used in various departments such as metallurgy, petroleum, chemical, power, light industry, textile, food, national defense, and scientific research. It has the advantages of bending, high pressure resistance, fast thermal response time, and durability

【 Detailed Introduction 】

I. Overview

The K-type handle type armored thermocouple is a widely used temperature device in temperature measurement. Its main characteristics are wide measurement range, stable performance, simple structure, good dynamic response, and the ability to transmit 4-20mA electrical signals remotely, making it easy for automatic and centralized control.

2、 Product standards

The thermal response time shall not exceed the specified value in the table below: (s)

Diameter (mm)	thermocouple
Insulated type	Shell type
2	0.5	0.4
3	1.2	0.6
4	2.5	0.8
5	4.5	1.2
6	6	2
8	8	4

3、 Working principle

It is a circuit formed by welding two conductors with different compositions at both ends. The temperature measuring end is called the working end, and the wiring terminal end is called the cold end, also known as the reference end. When there is a temperature difference between the working end and the reference end, a thermal current will be generated in the circuit. When connected to a display instrument, the instrument will indicate the corresponding temperature value of the thermoelectric potential generated by the thermocouple. The thermoelectric potential of the K-type handle armored thermocouple will increase with the temperature rise at the measuring end. The magnitude of the thermoelectric potential is only related to the material of the thermocouple conductor and the temperature difference at both ends, and is independent of the length and diameter of the thermoelectric electrode.

The structural principle of the K-type handle type armored thermocouple is that it is made of a conductor, high insulation magnesium oxide, and a protective tube made of 1Cr18Ni9Ti stainless steel, which is pulled together multiple times. Armored thermocouple products are mainly composed of junction boxes, terminal blocks, and armored thermocouples, and are equipped with various installation and fixing devices.

Recommended temperature for use

variety	Sleeve material	Outer diameter (mm)	Operating temperature (℃)
long-term use	Short term use
Nickel chromium nickel silicon	1Cr18Ni9Ti	2	600	700
3.0,4.0,5.0,6.0,8.0	800	900
GH3030	2.0,3.0	800	900
4.0,5.0	900	1000
6.0,8.0	1000	1100
Nickel chromium silicon nickel silicon	1Cr18Ni9Ti	2	600	700
3.0,4.0,5.0,6.0,8.0	800	900
GH3030	2.0,3.0	900	1000
4.0,5.0	1000	1100
6.0,8.0	1100	1200
GH3039	2.0,3.0,4.0	1000	1100
5.0,6.0,8.0	1100	1200
Nickel chromium copper nickel	1Cr18Ni9Ti	2	500	600
3.0,4.0,5.0	600	700

Ordering instructions:

1. Indicate the thermocouple, graduation number, and operating temperature range.

2. Number of thermocouple points, thermocouple protection tube material, diameter, length, etc. (The total length of the protective tube is L=l150, and special insertion depths and protective tube materials can be ordered according to the agreement)

3. For those with fasteners and flange devices, the dimensions need to be provided first.