KIKUSUI Switching AC Power Supply PCR-WE/WE2

NegotiableUpdate on 12/14

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

KIKUSUI switch AC power supply PCR-WE/WE2, with a power range of 1kVA, 2kVA, 3kVA, 6kVA, 12kVA, 18kVA, 24kVA, 30kVA, 36kVA, and 15 different models. The 6U size has a high power density design of 6kVA, and a single cabinet can achieve 36kVA. Multiple models above 3kVA can switch between single-phase/single-phase three wire/three-phase output functions with the same capacity (PCR-WE2 series). In addition, it can also operate in parallel and expand to 144kVA.

Product Details

Product Features

KIKUSUI Switching AC Power Supply PCR-WE/WE2The power range includes 15 models including 1kVA, 2kVA, 3kVA, 6kVA, 12kVA, 18kVA, 24kVA, 30kVA, and 36kVA. The 6U size has a high power density design of 6kVA, and a single cabinet can achieve 36kVA. Multiple models above 3kVA can switch between single-phase/single-phase three wire/three-phase output functions with the same capacity (PCR-WE2 series). In addition, it can also operate in parallel and expand to 144kVA.

PRODUCT FUNCTION

Application of KIKUSUI Switching AC Power Supply PCR-WE/WE2

1) Simulation of abnormal power cord

The output of PCR-WE/WE2 can be simulated for power line abnormalities using power outage, voltage drop (decrease), and voltage rise (increase). Can be used for testing switch power supplies and electronic devices

2) Can be used as a large capacity high-voltage battery when outputting DC

The simulation of high-voltage batteries needs to be increasingly advanced. Batteries have two functions: output current and absorption current.
Output DC ± 877V in single-phase 3-wire mode (capacity only 2/3)

In this way, it can be used for verification of EV built-in chargers, DC/DC/various ECU development, and AC/DC verification of power storage equipment

3) Instantaneous current supply capability increases

Can provide the pulse current required for motor startup

The PCR-WE can withstand peak currents corresponding to a peak coefficient of 4, and general impulse currents can also be considered based on a peak coefficient of 4, so it meets the impulse current requirement of 4 times the rated current. The DC surge current to be introduced later is also 4 times the rated current value for 8ms

When DC devices are started or the power supply changes, they will generate surge currents. The corresponding diagram of the impulse current of PCR-WE is as shown in the "Time and Current Relationship of Impulse Current" above.

4) Improve EMC test performance

Low radiation noise, low power terminal noise
Low ripple noise
The possibility of oscillation is low for loads with filters
Equipped with harmonic testing function

When measuring harmonic currents, voltage distortion can be confirmed

software