KL junction box series

The door panel and box are installed with dedicated screws and protective rings according to universal standards, which not only

Ensure the protection level and ensure that the box is used and maintained in extremely small spaces

The multi-layer protective groove at the box mouth not only serves as a reinforcement but also prevents the door panel from hitting

When opening, dirt and water enter the box

PU foam sealing strip ensures that the protection level of the box reaches IP56

The grounding wire can connect the box and door panel

Both sides of the box are equipped with bracket strips with screw holes to ensure maximum installation

Height, and can be installed with support rails or mounting plates

The specially designed plastic insulation sleeve not only seals but also enables the door panel screws to be tightened

It will not come off and serve as a guide when the screw is tightened

Material Science:

Cold rolled steel plate

Surface treatment:

Phosphating primer treatment for the box and door panels, exterior

For powder coating, colors can be divided into RAL7032

Two types of weaving patterns with RAL7035

Protection level:

IP56 (according to GB4205-1993)

Standard configuration:

Door panel, box body, sealing strip, box cover screws

Installation board (optional)

Steel plate thickness:

Box: 1.5mm Door panel: 1.5mm

Installation board: 2.5mm