KM2810 Charge Amplifier

NegotiableUpdate on 11/04

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

A charge/voltage converter is essentially a simple charge amplifier that converts charge signals into voltage signals. Generally, there are many acceleration sensors that use charge output methods, which require specialized charge amplifiers for conversion before they can be connected to analyzers for use. But if KM2810 is used, it can avoid complex signal and power wiring, as long as it is an FFT analyzer or other measuring instrument with constant current source output

Product Details

A charge/voltage converter is essentially a device that converts charge signals into electricity A simple charge amplifier for voltage signals.

Generally, there are many acceleration sensors that use charge output methods, which require specialized charge amplifiers for conversion before they can be connected to analyzers for use. But if KM2810 is used, complex signal and power wiring can be avoided. As long as it is an FFT analyzer or other measuring instrument with a constant current source output, the converter can be directly connected to the signal input terminal of its BNC socket, and the other end can be connected to the sensor, greatly simplifying the wiring.

feature

·Small and lightweight, the amplifier is integrated into the connector

·Can be directly connected to a device with constant current outputFFTSensor input terminals for instruments and equipment such as analyzers

rulegrid:

model	KM2810
gain	10mV/pC*1
frequency range	2HZ～45kHz(±3dB)The5HZ～15kHz(±0.5dB)*2
output voltage	greater than10Vp-p
Output bias voltage	10Vdc±2Vdc
Input end self noise	less than0.05pC(rms)
drive power supply	Voltage:18V～24VDCConstant current:2.0mA～10mA
Interface shape	Input end: Pocket sized connector, screwNo. 10-32UNF Output end:CO2plug(BNCplug)
construction	input/Output: connector connection, shell grounding
Shell material	stainless steel316