KM4420-A Fully Automatic Vibration Calibration Platform

Technical Specification

1) KM4420-AThe fully automatic vibration calibration table requires the use of imported materials7.5 inchTFTTouch screen display and Chinese languageWINDOWSSystem interface menu settings and operations, resolution 640×480.

2) KM4420-AThe fully automatic vibration calibration table can performUDisk storage/Transfer data,UHot swappable disk with standard configurationUSBMouse interface, which can be used to operate the system interface menu with a mouse.

3）KM4420-AThe fully automatic vibration calibration table is capable of fully automatic frequency scanning vibration calibration, with digital display of vibration acceleration, vibration velocity, and vibration displacement size.

4）KM4420-AThe fully automatic vibration calibration table is suitable for calibrating Bentley330500/9200/74712/330400/190501TheeproPR9266/9268Schenck, GermanyVS－069/169TheVS－068/168XinchuanCV－851/852Equivalent model speed sensor;BN330400The Entek9200Waiting for acceleration sensor.

5）KM4420-AThe fully automatic vibration calibration table can automatically display the real-time waveform of the tested sensor on the touch screen of the instrument. It is required that the waveform display ratio of the calibration sensor can be adjusted in the interface software/Store the vibration velocity, peak to peak acceleration, and effective value measured by the sensor at a certain location and frequency condition.

6）Capable of intelligently drawing, storing, outputting and printing linear characteristic curves and amplitude frequency characteristic curves of various vibration velocity and acceleration sensors; Can record/Calculate the characteristic data of the linear curve of the calibrated sensor, calculate the sensitivity, sensitivity error, and nonlinear error of the calibrated sensor; display/Store the peak to peak value and effective voltage of the dynamic vibration waveform of the calibrated sensor; display/Store the amplitude frequency characteristic curve of the calibrated sensor.

7）KM4420-AThe multiple sensors calibrated by the fully automatic vibration calibration table in the lower computer should be stored in the lower computer with different numbers and serial numbers for easy searching. The various reports generated after verification should be able to be exported on the upper computerWORDandEXCELThe format is editable.

8）KM4420-AThe fully automatic vibration calibration table can automatically draw, store, and output the frequency spectrum curve and various reports of the tested sensor. Data can be uploaded to through standard Ethernet cablesPCMachine (laptop), and can print sensor linear data, amplitude frequency data, linear curves, amplitude frequency curves, etc. offline.

9）Vibration table operating frequency range:10HA～640HA.

Vibration table output range: maximumHigh acceleration:5gaccuracy0.1g,, precision0.1%，

Maximum speed:500mm/saccuracy0.1mm/s, precision1%

Maximum displacement:2.mmaccuracy1um,, precision0.2%

Maximum mass of calibrated sensor1300gram