KM8800 split type vibration meter

NegotiableUpdate on 11/04

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The KM8800 split type vibration meter consists of an acceleration sensor and a handheld vibration meter. It can measure the effective values of vibration acceleration, vibration velocity, and peak to peak displacement. It has the characteristics of easy operation and portability, mainly used for rapid inspection of equipment such as steam engines, water engines, motors, fans, pumps, compressors, machine tools, etc., and for preventive inspection of mechanical equipment failures.

Product Details

1、 Introduction

KM8800The split type vibration meter consists of an acceleration sensor and a handheld vibration meter. It can measure the effective values of vibration acceleration, vibration velocity, and peak to peak displacement. It has the characteristics of easy operation and portability, mainly used for rapid inspection of equipment such as steam engines, water engines, motors, fans, pumps, compressors, machine tools, etc., and for preventive inspection of mechanical equipment failures.

IIComposition and technical indicators

1. Signal input: accelerometer sensor

2. Amplitude measurement range: Acceleration:0.1～199.9m/s²(Half peak value)

Speed:0.1～199.9mm/s(Effective value)

Displacement:1 ～1999Mm(Peak to Peak Value)

3. Frequency response: Acceleration:5Hz～2000Hz

Speed:5Hz～1000Hz

Displacement:5Hz～500Hz

4. Accuracy: ±5%

5. Display mode:3Half digit LCD display

6. Power supply:9VStacked battery, when the battery voltage<5.5VWhen there is a low voltage prompt. 2Automatic shutdown in minutes

7. Size:185（H）×68（W）×30（D）mm