KTF Sliding Block Series Displacement Sensor

Universal KTF slider series linear displacement sensor, effective stroke 75mm~3500mm, both ends have 4mm buffer stroke, accuracy 0.15%~0.04% FS

The universal KTF slider series linear displacement sensor has an effective stroke of 75mm to 3500mm, with 4mm buffer stroke at both ends and an accuracy of 0.15% to 0.04% FS. The surface of the housing is anodized for corrosion resistance; Built in conductive plastic measuring unit, no temperature drift, long lifespan; Equipped with automatic electrical grounding function. The sealing level is IP54 (IP65 when installed downwards), and the DIN43650 standard plug and socket can be used in most general applications, especially in situations where the length direction is limited and alignment is difficult; The pull rod, in conjunction with the ball head, has a 10mm automatic correction function, allowing for a maximum sports speed of 10m/s.

Characteristics of KTF Sliding Block Series Displacement Sensor：

1. Rod free design

2. Ball joints can avoid lateral forces

3. Long service life, operating more than 50-10 times

4. Low nonlinearity

5. Resolution higher than 0.01mm

6. High operating speed

7. DIN43650 standard plug and socket

8. Protection level IP54 (IP65 when installed downwards)

9. Configurable voltage and current (2-wire, 3-wire) module

KTF Sliding Block Series Displacement SensorInstallation dimension drawing

KTF Sliding Block Series Displacement Sensor Parameter Table