L-4050 Two Axis Rail Horizontal Lathe and Milling Center

1. Bed frame

Made by advanced resin sand casting and box structure design, the lathe is treated with aging to eliminate internal stress, and the material is tough. Combined with box structure design and high rigidity body structure, the lathe has sufficient rigidity and strength to demonstrate cutting resistance and high precision.

2. Transmission shaft
The X/Y axis adopts high-precision double nut preloaded precision ball screws, combined with the locking and pulling design of the support seats at both ends, which can eliminate the transmission backlash and pre compensate for the errors caused by temperature rise, ensuring positioning accuracy.

3. Screw rod
The X/Y axis adopts high-precision double nut preloaded precision ball screws, combined with the locking and pulling design of the support seats at both ends, which can eliminate the transmission backlash and pre compensate for the errors caused by temperature rise, ensuring positioning accuracy.

4. Spindle motor
By using a high-speed motor, the CNC lathe has excellent performance in high-speed, low-speed, light and heavy cutting (power up to 7.5/11KW).

5. Electrical box
The electrical box is equipped with a heat exchanger to ensure system stability, and the external wiring part has protective coils that can withstand heat and oil and water.

6. Lubrication system
The automatic depressurization lubrication system provides centralized oil supply, with an advanced depressurization intermittent oil supply system that provides timely and appropriate oil supply to each lubrication point in a timed, quantitative, constant pressure, and individual manner, ensuring that each lubrication position receives lubricating oil at the right time, allowing the CNC lathe to operate for a long time without any worries.

7. Fully dense sheet metal
Under the current strong requirements for environmental protection and operator safety, Jiasu Precision Machinery has implemented the Jiasu L-4050CNC horizontal latheThe sheet metal design focuses on aesthetic appearance, environmental friendliness, and ergonomic compliance. The fully sealed sheet metal design completely prevents cutting fluid and cutting fluid splashing outside the CNC lathe, keeping the surroundings of the CNC lathe clean.

Product model:	Jiasu L-4050
Processing capability
Maximum turning diameter on the bed:	400
Maximum turning diameter on the saddle:	220
Maximum turning diameter:	400
Maximum turning length:	420
Bed tilt angle:	45°
Spindle
Specification of spindle nose end:	A2-6
Specification of spindle chuck:	8'
Spindle through-hole/rod diameter:	61/49
Maximum spindle speed:	4000
Feed axis
X/Z-axis travel:	230/500mm
X/Z-axis fast movement speed:	24/24m/min
X/Z-axis screw specifications:	3208/3208
Positioning accuracy:（GB/T18400.4）	0.01
Repetitive positioning accuracy (GB/T18400.4)	0.007
electric machinery
Spindle motor power:	7.5/11kw
X/Z-axis motor power:	1.8/1.8kw
Cooling motor power:	0.49kw
Hydraulic station motor power:
Tail seat
Tail seat travel:	450
Sleeve travel:	100
Sleeve diameter:	φ72
Tail socket taper:	MT4
Tool changing system
Type of tool change:	Hydraulic turret
Knife tower model:	Y160
Number of knife positions:	8 knife positions
Standard tool holder size:	25X25mm
Standard boring bar diameter:	φ32mm
General specifications
Power capacity:	15KVA
Dimensions (length X width X height):	2640*1750*1700
Net weight (approximately):	3.5T

Standard configuration:

1. Japanese FANUC/Mitsubishi/Guangshu GSK controllers
2. Electrical box heat exchanger
3. Standard RS-232 interface
4. RS-232 transmission cable
5. Hydraulic three jaw chuck
6. Fully sealed splash proof device
7. Automatic centralized lubrication system
8. Work lighting
9. Work status indicator light
10. Three phase isolation transformer
11. Toolbox
12. Basic adjustment screws and washers
13. Operating instructions

Select configuration:

1. Taiwan's new generation controller
2. Elastic sleeve clamp
3. Main spindle C-axis control function
4. Spindle positioning brake device
5. Power turret device
6. Automatic workpiece collector

Jiasu Precision Machinery aims to produce advanced precision mechanical products, and through careful design and precision manufacturing, produces Jiasu brand CNC machine tools, injection pull blowing integrated machines and other products. After nearly 20 years of unremitting efforts and development, the brand has won market reputation and is widely recognized by domestic and foreign customers. We sincerely invite domestic and foreign sales agents who are interested to join our team. We will fully respect and protect the rights and interests of agents, and provide comprehensive technical guidance and after-sales service support.

Brand advantages and policy support:

1. The product is located in a modern production base in Guangzhou, Pearl River Delta;

2. High quality branded products, agents enjoy discounted prices and priority supply of products;

3. Assist agents in completing sales negotiations, technical guidance, and fundraising in all aspects;

4. Support from after-sales maintenance outlets across the country;

5. All levels of agents can receive annual sales performance rewards.

1. Product price: Pricing based on specific customer configurations
2. Logistics costs: negotiable
3. If you need more specific information, please contact us. Jiasu Precision Machinery will be happy to serve you