LABOM type temperature switch manufacturer

LABOM type temperature switch manufacturer

Design features

Multi functional temperature transmitter/temperature switch

Multiple clamping units for process connection

The clamp block is applied to pipes Ø 4... 57mm

The clamp ring is applied to pipelines Ø 10... 300mm

The clamp hook is used for pipes Ø 4... 17.2mm

Sanitary temperature measurement for pipe diameters ranging from 4 to 300mm

■ Measurement system acquisition

High precision and fast response

Easy to install

No need for welding, no need to interrupt the production process

No need for additional isolation

■ Insertable measuring components can be calibrated

Sanitary design and structural design comply with EHEDG standards

4-digit LED display, capable of 180 ° reverse display

The indicator module can rotate freely up to 300 °

Process temperature range -40 ℃ to 150 ℃

Output signal 4... 20mA, two-wire technology

■ Convenient on-site programming

The transmitter and switch outputs are electrically isolated

optional

Parameter adjustment can be made through COMLINE.SPC software

Two floating switch contacts

The switch contact has a high switching current (1A)

The verification certificate complies with DINEN10204-3.1

The electrical connection can rotate 300 °

_{LABOM type temperature switch manufacturer}

Application field

Food industry

Pharmaceutical industry

Biochemical technology

Shell design

Design seamless sanitary shell, fully encapsulated

electronic component

Material: Stainless steel 1.4301 (304),

Display module Macrolon

Protection level IP67, compliant with DINEN60529

Electrical connections Circular connector M12, 4-pin

Circular connector M12, 8-pin 1

When equipped with a switch option, it is necessary to

Temperature measuring element

Measure the insertion of stainless steel Ø 6mm, threaded connection with the connector, and subjected to spring tension.

The measurement insertion part can be recalibrated or replaced. The installation method remains unchanged. The measuring unit is made of silver and isolated by plastic insertion components.

Measurement of resistance Pt100, three wire thin layer technology

temperature range

Environmental temperature -20 ℃... 85 ℃

Process temperature -40 ℃... 150 ℃

Allowable storage temperature -40 ℃... 100 ℃

Other temperature ranges are based on customer requirements.

Pipe clamp

Material: heat-resistant high-performance plastic, integrated isolation system

Protection level IP65, compliant with DINEN60529

Nominal size of pipeline

Applicable to all standard nominal pipelines. Please refer to the selection table for detailed dimensions.

instruction

Type 4-digit number, red 7-segment

LED on-site indication

Digital display height 8.5mm

Numbers with resolutions ranging from 9999 to 9999

The direction can be rotated 300 degrees, and when installed in reverse,

Digital display can be reversed 180 °

instructions? measured value

Measurement unit

Operation menu

The decimal point is automatically set according to the measurement range/unit

Z can be set in 3 positions or manually set in positions 0... 3

Temperature and units can be alternately displayed on the screen through manual buttons or by pressing cycles (cycles can be set)

Measurement units ℃, ℉, K, mA can be set

measurement range

The measurement range parameters can be set between -40... 150 ℃, with a small range span of 25K

output signal

Output signal 4... 20mA, two-wire technology loading communication signal response characteristics temperature linearity

Current range 3.8... 20.5A

Resolution 0.3A

Current limit ≤ 21mA

Load ≤ (U-12V)/21mA (Ohm)

Switch delay<5s

auxiliary power supply

Nominal voltage 24VDC

Scope of work: 12... 30VDC

Integrated voltage reverse protection

precision

transmitter

Linear error*

<0.2K or 0.08% measurement range

Temperature effect Tu1<0.1%/10K

Auxiliary power supply impact<0.005% measurement range

Load impact ≤± 0.02%/100 Ω

1Tu=ambient temperature