LED street light assembly line

Guangshengde LED Street Light Assembly Line Features:

1. This device is specifically designed for detecting the aging of AC LED bulbs, 220V, and 110V LED energy-saving lamps. By aging the 220V LED energy-saving lamp in high voltage, medium voltage, normal pressure, low voltage, high temperature, roaming, impact, and other voltage zones, it can observe whether the LED energy-saving lamp can pass the aging test in the above voltage ranges. This product is a patented product approved by the Patent Office (patent number: ZL 2012 2 0526602.7). 2. The fixture board can age the bulb lamp and LED energy-saving tube, fully meeting the requirements of product aging time. 3. There are a total of 106 chain plates on the entire line, each equipped with 16 E27 five clip lamp holders, 4 pairs of T8 fluorescent lamp holders, 1696 aging bulb lamps or 424 fluorescent tubes (fully distributed throughout the line)

GuangshengdeKey points of LED street light assembly line technology:

1. Constant temperature zone: The constant temperature system is completed by electric heating, set as followsThe 5-meter layer is the heating section, and the second meter is equipped with two 1KW ceramic heating tubes, three temperature collection points, and automatic temperature controlTo: room temperature+80 ℃. 2. Detecting impulse beat circuit: using Tianzheng brand voltage regulator 10KW voltage regulator 1 set 0-250V adjustable, with 6 zones along the entire line, and the impact time for each zone can be set on the touch screen interface. 3. Detecting atmospheric pressure electricityRoad: One 10KW voltage regulator from Tianzheng brand, adjustable from 0-250V, is used as the low-voltage testing area. (Regional scope)Around 7 meters). 4. Detecting low voltage circuit: using Tianzheng brand voltage regulator 10KW voltage regulator 1 set 0-250V adjustableSet as a low voltage testing area. (Area range of about 7 meters). 5. Detecting high-voltage circuits: using Tianzheng brand tuningOne 10KW voltage regulator, adjustable from 0-300V, is set as the high voltage testing area. (Area range of about 7 meters). 6The bulb light connecting plate adopts E27 screw socket. 7. The aging of the lamp tube is achieved by installing a fast T8 lamp tube holder fixture. (Lamp)The pipe seat fixture can be adjusted to 300, 600, 900, 1200mm);

GuangshengdeAppearance protection requirements for LED street lamp assembly line:

1. The body and frame are made of 40 * 40 * 1.5 (MM) steel pipes welded together. The upper and lower parts of the body are made of 130 * 23 (MM) aging line specific aluminum alloy profiles, and the protective plate is made of 1.5MM cold plate bent; 2. The transmission chain adopts inch double pitch single side ear double hole chain; 3. Set up a light blocking passport online, using a combination of organic glass and aluminum profiles to effectively reduce the strong light of energy-saving lamps and better protect the eyes.

GuangshengdeAppearance protection requirements for LED street lamp assembly line: Dimensions:

1. The entire line is equipped with two electric trough rails, which are made of edge epoxy board. Assemble a 3mm thick copper conductive strip. The offline installation of the track protection anti drop net is used to prevent the product from falling and being damaged. High quality stainless steel fine mesh is used to fix both sides with angle iron. 2. The equipment must not rust or generate dust. 3. Equipment noise: below 65dB. 4. The footrest is equipped with a galvanized adjustable level and height footcup. 5. The total length of the line is 10 meters, and the height between the working face and the ground is 750 ± 20mm, which can be adjusted. 6. Dimensions: L10000mm * W1620mm * 1270mm

Power and transmission of LED street lamp assembly line: 1. The motor adopts Taiwan Kun 1.5KW three-phase motor, 1:200 reducer, 2HP frequency converter, variable frequency speed regulation, adjustable line speed from 0-2M/min, and adjustable aging time from 0-4 hours. 2. The transmission device adopts a 1-inch T17 tooth double pitch sprocket with a diameter of 50 spindle and tensioning mechanism.