-
E-mail
ouzhenyang@four-faith.com
-
Phone
18950099927，13338453601，15396277703，18610723626
-
Address
Room 300, Jin Yuanjian Building, No.1 Courtyard, Shangdi 7th Street International Entrepreneurship Park, Haidian District, Beijing
Product Categories
Beijing Sixin Digital Technology Co., Ltd
LoRaWAN standalone smoke detector
NegotiableUpdate on 04/17
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The F-SDM100 independent photoelectric smoke and fire detection alarm (photoelectric smoke detector) is a smoke and fire detection alarm product that supports LoRaWAN. It adds wireless transmission and networking functions to the independent smoke detector, achieving centralized monitoring and management of the independent smoke detector
Product Details
Independent photoelectric smoke and fire detection alarm (photoelectric smoke detector)F-SDM100 is a smoke and fire detection and alarm product that supports LoRaWAN. It adds wireless transmission and networking functions to the independent smoke detector, achieving centralized monitoring and management of independent smoke detectors. This photoelectric smoke detector can be applied in security or fire protection systems.
-
1、 Smoke detection function
The independent photoelectric smoke and fire detection alarm is a type of household smoke and fire detection alarm specially developed for the Chinese domestic market. It can also be applied in security or fire protection systems and belongs to the category of independently working photoelectric smoke and fire detection alarm. When the smoke concentration on site reaches the alarm threshold or the test switch is pressed and held, the LED of the alarm will change from long-term flashing once to rapid flashing, while emitting an audible alarm signal. When the smoke concentration is lower than the alarm threshold or the test switch is released, the independent photoelectric smoke fire detection alarm will return to normal state (without locking the alarm state, the LED will return to long-term flashing and the sound will disappear).
☛ Alarm testing
There is a test button above the independent photoelectric smoke and fire detection alarm. Pressing it for more than 3 seconds will trigger an audible and visual alarm. At this point, the device will also report an alarm to the server.
☛ Anti pry alarm
If the independent photoelectric smoke and fire detection alarm is not installed properly or is pried, it will immediately trigger the alarm. The platform will immediately be aware of the device being pried.
☛ Offline alarm
The LoRaWAN standalone photoelectric smoke and fire detection alarm will regularly report data to the platform every 8 hours. If the device does not report data for one consecutive day, it will trigger an offline alarm.
☛ Smoke monitoring alarm
shouldWhen the independent photoelectric smoke fire detection alarm monitors smoke, it immediately triggers the alarm data to the platform.
☛ Sleep and wake-up
shouldLoRaWANThe independent photoelectric smoke and fire detection alarm is in the awake state when powered on. After 5 seconds, it enters a timed sleep mode, which lasts for 8 hours. After waking up, it sends a heartbeat packet and continues to sleep.
☛ Fire alarm function
shouldLoRaWANWhen the independent photoelectric smoke fire detection alarm triggers a fire alarm, and the fire alarm trigger port is at high level, the device wakes up and reports the fire alarm information to the gateway.
☛ tamper device
shouldIndependent photoelectric smoke and fire detection alarm with tamper proof switch status changeWhen,Start detection in two seconds. If the switch status changes, immediately send an alarm to the gateway. Otherwise, it will be considered as a false press.
☛ Heartbeat packet reporting
shouldLoRaWANThe independent photoelectric smoke and fire detection alarm wakes up every 8 hours, collects the current device voltage, and reports the heartbeat packet.
