MARUEI Marurong Mechanical Cylinder Grinding Disc MG-200

MARUEI Marurong Mechanical Cylinder Grinding Disc MG-200

MARUEI Marurong Mechanical Cylinder Grinding Disc MG-200

Small cylindrical grinding discs MG-200, MG-300

Automatic circular cylindrical grinder POG-300, POG-200

Cylindrical grinding disc POG-300S

Grinding disc PIG-300S for internal surface grinding

The small cylindrical grinding disc is a universal grinder designed for high-precision and high-efficiency grinding of small parts. It reverses the common sense that "good products are expensive" and pursues low cost, making it a grinder with less equipment burden.

Small cylindrical grinding discs MG-200, MG-300 features:

Simple structure. All components retain only the necessary minimal functionality, forming a minimal and concise structure.

The spindle can achieve stepless speed regulation. The component used for spindle rotation can achieve stepless speed change through a DC motor built into the spindle head.

Easy to operate. The handles, knobs, levers, etc. are all concentrated in positions that are easy for operators to operate, providing rich operability.

The setup of external and internal research is simple. Easy to set up internal and external grinding. The foil head used for external research is easy to disassemble, and its function as an internal surface grinder can be realized by replacing the internal research device.

Durability. The sliding surfaces of the workbench and sanding wheel platform have undergone wear-resistant treatment, which can maintain high precision for a long time.

Characteristics of automatic circular cylindrical grinder:

Adopting a pulse motor control method for the feed motion of the sand wheel table, it is an ideal high-precision cylindrical grinder that does not require the thermal effects and maintenance troubles of traditional hydraulic control methods.

The grinding wheel spindle adopts a pulse motor feed, and the feed speed, feed amount, spark adjustment range and other conditions can be easily set through the volume knob or digital switch for information flow.

The automatic feed rate of the workbench and the cutting speed of the sanding wheel table can be easily adjusted through a frequency converter during the machining process.

By switching the switch, automatic grinding cycles including horizontal grinding, groove grinding, swing grinding, and other automatic adjustments (special specifications) can be achieved.

After installing the loading/unloading device (special specifications), fully automatic grinding can also be achieved.

The sliding surfaces of the worktable and sanding wheel table are treated with wear-resistant resin, which can maintain high precision for a long time.