Product Categories

Shanghai Jiuke Electronic Technology Co., Ltd

E-mail
Phone
Address
No. 48, Lane 98, Shunda Road, Nanxiang Town, Jiading District, Shanghai

MC-2000C paint film thickness gauge

NegotiableUpdate on 09/28

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Brief introduction: The MC-2000C paint film thickness gauge (coating thickness gauge) has a measurement range of 0-5000um. The MC-2000C paint film thickness gauge adopts single-chip technology, with high accuracy, digital display, stable indication, low power consumption, simple and convenient operation, touch buttons, single probe full range measurement, small size, and light weight; And it has storage, reading, statistics, low voltage indication, and system calibration

Product Details

Details introduction:

Application scope:

The MC-2000C paint film thickness gauge adopts magnetic thickness measurement method, which can conveniently and non destructively measure the thickness of non-magnetic paint films on ferromagnetic materials, such as zinc, copper, chromium coatings on steel surfaces or paint, enamel, fiberglass, spray coating, asphalt and other paint films. This instrument is widely used in industries such as machinery, automotive, shipbuilding, petroleum, chemical, electroplating, spraying, enamel, plastics, etc.

working principle

：

The MC-2000C paint film thickness gauge uses electromagnetic induction method to measure the thickness of the coating layer. The probe located on the surface of the component generates a closed magnetic circuit, which will change to varying degrees as the distance between the probe and the ferromagnetic material changes, causing changes in magnetic resistance and probe coil inductance. The MC-2000C paint film thickness gauge uses this principle to measure the distance between the probe and the ferromagnetic material, that is, the thickness of the coating layer.

2、 Product performance

1. Measurement range: 0-5000um

2. Measurement error:<3% ± 1um

3. * Small indication: 1um

4. Display mode:

4-digit LCD digital display

5. Main functions:

(1). Measurement: Full range thickness measurement with a single probe

(2). Storage and deletion: It can store 600 measurement data, delete individual data in the measurement, or delete all data in the storage area.

(3). Read: Read the stored measurement data

(4). Statistics: There are three statistical measures, the average multiplied by the minimum value

(5). Calibration: System calibration can be performed

(6). Battery level: Equipped with undervoltage display function

(7). Printing: capable of printing measurement values, optional micro printer

(8). Shutdown: There are two methods: automatic shutdown and manual shutdown

6. Power supply:

Two 1.5V batteries

7. Power consumption:

Power consumption of 100mw

8. Full size appearance:

51mm*126mm*27mm

9. Weight:

160g (including battery)

10. Operating environment temperature: 0 ℃~+40 ℃

Relative humidity: not exceeding 90%

11. Substrate * small thickness:

0.5mm

12. Diameter of substrate * small plane:

7mm

13. * Small curvature radius:

Convex: 1.5mm Concave: 6mm

14. Under voltage indication:

Displayed in the upper right corner

*Critical thickness is small: When the iron-based thickness of the workpiece is greater than 1mm, the measurement of the coating (plating) thickness is not affected by the iron-based thickness