MCS-II Intelligent Speed Monitoring Instrument

MCS-II Intelligent Speed Monitoring Instrument

Mainly applicable to fields such as water conservancy, electricity, steel, metallurgy, chemical industry, petroleum, and mineral resources, it continuously monitors and measures the vibration of various rotating machinery in real-time. Facilitate users to understand the real-time operation status of the device, and conduct analysis and maintenance. Can be used with variousDCSThePLCSystem connection, when the vibration value exceeds*This instrument can be connected to an external sound and light alarm to prompt on-site operators to take preventive measures, and has alarm and danger switch output to protect the safe and reliable operation of the machine and avoid unnecessary economic losses.

Main functions
Monitoring and protection of bearing vibration in rotating machinery such as steam turbines, water turbines, compressors, and blowers.

Function Description:

1. display function
Vibration measurement value, I value alarm The set values for the II value alarm can be set separately atLEDDisplayed on the digital tube.
2. alarm function
When the vibration intensity exceeds the alarm set value, the alarm indicator light will turn on, and at the same time, a switch signal will be output on the rear panel to protect the monitored equipment.
3. Alarm delay time setting function
Adjustment range of alarm delay time0～3Second, to prevent on-site interference from causing false alarms.
4. Self-diagnostic function
Equipped with power on and power off detection functions, while disconnecting the alarm output circuit, it can effectively suppress false alarms of the instrument.
5. output interface
Equipped with a current output interface, it can be connected to computersDCSThePLCsystem,Connect devices such as paperless recorders.

MCS-II Intelligent Speed Monitoring InstrumentTechnical Specifications:

1. Sensor input:LH100Vibration speed sensor, sensitivity:20mV/mm/S±1%Frequency response:5～1000Hz
2. Display mode:5Digital display, accuracy:±0.5％
3. Measuring range:0~500μm(Peak)-Peak amplitude value);0~50.0mm/s(Vibration) Intensity);

4. Current output:4～20mAor0～10mA,Load ≤500Ω
5. Alarm contact capacity:AC220V/3A，DC28V/3A
6. working environment:temperature0～55℃ Relative humidity:≤95%
7. Working power supply: AC220VAC±10% 50Hzpower consumption≤10W
8. Installation method:disc type
9. Overall dimensions:160(Width)×80(High)×250(Deep)mm
10. Hole size:152(Width)×76(High)mm

Electrical indicators:

1External power supply;220VAC 50Hz 2A


2Input
Signal: Accept oneLH510Magnetic resistance sensor signal
Waveform: sine wave or pulse
Amplitude:≥10VAC(Effective value)
Input impedance:>10KΩ

3Range:1～99999rpm

4Display
Display mode: Five digits0.8inchLEDdigital display
Display accuracy:±1 rpm
photoelectric tubeLEDIndication: On site operation status of the machine

5、 齿数：1～255arbitrary

6Output
Current output:4～20mAactive
Output load:≤500Ω

7Alarm point setting
Scope:0～*full scale
accuracy:±0.1%

8Relay
Sealing: Epoxy resin
Node capacity:2A/220VACor1A/28VDC
Node output: normally open contact

9TheRS485Communication interface: used for parameter programming combination
Baud rate9.6K～38.4Kbps

Environmental indicators:
temperature range
Run time:0℃～+65℃
During storage:-30℃～+80℃
Relative humidity: to95%Not condensing