MMF vibration calibrator model

MMF vibration calibrator modelfeature
Adaptive Calibration System
Test amplitude up to 1 m/s? rms
Vibration frequency ranges from 70 Hz to 10 kHz
The weight of the tested object reaches 400 g
The internal signal conditioner is suitable for charge, IEPE (piezoelectric integrated circuit), and voltage signals
Traceable PTB standards
Internal storage unit for test results
USB interface for PC control calibration
Professional operating software and sensor database
Software control parameters can be customized through simple ASCII commands
Equipped with NiMH battery pack for laboratory or on-site use
MMF vibration calibrator modelThe cost-effectiveness

MMF vibration calibrator modelBy relying on internal reference circuits, vibration levels can be accurately measured and controlled. The FFT spectrum of vibration signals can be monitored for a long time and compensated for distortion through the company's ACHDTM technology.

The VC120 MMF vibration calibrator is equipped with a signal conditioning channel to connect the sensor and testing equipment.
It can be applied to sensors for charge, voltage, and IEPE output. Built in calculator can calculate input
The effective value (root mean square) of the signal. All important settings of the test results can be displayed on the LCD monitor
Displayed above. The VC120 vibration calibrator has test data that can be processed, analyzed, displayed, and stored through PC software. In addition, the VC120 vibration calibrator also provides a USB interface output.
The instrument interface can also be accessed through virtual COM port mode using simple ASCII commands at the user's discretion
Control under the software. All vibration calibrators come with factory calibration certificates that can be traced back to the source
PTB (Federal Institute of Physical Engineering) standards