Manual rotary table LRG-A

：

LRG-A Manual Rotary Table

Product DescriptionCan rotate continuously

360°；The increment of laser scale is

2 °, with alignment lines for easy reading;

Bidirectional installation holes are available for both horizontal and vertical installation;

The side design features fixed screws for easy angle fixation;Manual rotary table LRG-AThe series is used for rotating adjustment occasions that require smooth and no backlash. with

Ø 25mm and Ø 50mm high load vertical installation turntable, equipped with M6 and M4 threaded hole arrays, can be connected to mechanical parts and prism installation pressure arms with the same thread specifications. There is a countersunk threaded hole at the bottom of the mounting seat, and the rotating table can be horizontally installed on the optical platform or bread board using an internal hexagonal cylindrical head screw. In addition, there is a M4 threaded hole designed on the side, which can be vertically installed on the Ø 12mm optical connector. In use, after adjusting the turntable in place, it can be fixed by tightening the M4 (2 mm hex wrench) screws on the side.