Mass flow meter transmitter

Mass flow meter transmitter

SIFLOW FC070 offers two types of products:

SIFLOW FC070 Standard Type

SIFLOW FC070 Explosion proof CT

The SIFLOW FC070 transmitter transmits real multi parameter measurement values, such as mass flow rate, volume flow rate, density, temperature, and component flow rate.

SIFLOW FC070 can be integrated into various PLC systems, such as:

Directly install into S7-300, C7

Separate installation into ET 200M, using S7-300 and S7-400 PROFIBUS DP/PROFINET motherboards

Separated installation into ET 200M, using standard PROFIBUS DP/PROFINET motherboards from other automation systems

Independently via MODBUS RTU motherboard, such as SIMATIC PDM

The SIFLOW FC070 transmitter can be connected to all models of MASS 2100, FCS200, and FC300 sensors.

feature

Very easy to integrate into SIMATIC S7 and PCS 7

• Maintenance using SIMATIC PDM configuration tool via MODBUS

• Exclusive quality flow meter chip based on the latest ASIC technology

Fast batch traffic step response with an update rate of 30 Hz

Due to the use of advanced DFT (Discrete Fourier Transform) algorithm, the anti-interference ability has been improved

The front-end resolution is higher than 0.35 ns, enhancing zero stability and improving anti-interference ability

Advanced diagnosis improves problem-solving ability and instrument calibration

• Built in batch controller with two-stage control mode

• Used for direct batch control, digital output of pulse/frequency

MODBUS RTU RS 232/485 interface, used for connecting with SIMATIC PDM and other MODBUS motherboards

• Digital input for batch control and zero point adjustment

Multiple simulation options for measuring values, input/output, and simple communication/fault detection of faults

Multi channel LED, which can easily indicate flow, faults, and input/output status

SENSORPROM technology automatically performs the following settings when the transmitter is started

-Factory pre programmed parameters, such as calibration data, pipeline diameter, sensor type, and input/output settings

-Automatically store any measurement values and set values changed by the user

-Automatically pre program new transmitters without affecting accuracy

-Complete the replacement of the transmitter within 5 minutes. Truly plug and play

The temperature measurement adopts Pt1000 4-wire system to ensure the accuracy of mass flow density and component flow measurement

The calculation of component flow is based on a 3-level algorithm, suitable for all applications

SIFLOW FC070 Ex CT has passed trade settlement certification and complies with OIMLR 139 (Compressed Gas Fuel Measurement System for Vehicles). It uses redundant digital outputs or encrypted Actirex components with SIMATIC touch screens

The free Activex component for SIMATIC touch screens can encrypt sensor process parameters for communication between SIFLOW FC070 ExCT and SIMATIC touch screens.

Mass flow meter transmitterapplication

The SIFLOW FC070 mass flowmeter is suitable for all applications in the entire process industry that require high-precision flow measurement. Can perform liquid and gas measurements.

The SIFLOW FC070 transmitter is mainly used in the following fields:

• Food and beverage industry

• Pharmaceutical industry

• Automotive industry

• Oil and gas industry

• Power generation and public power system

• Water supply and wastewater treatment

Structure:The SIFLOW FC070 is designed with an IP20 SIMATIC S7-300 housing, using centralized and decentralized mounting brackets, and is installed separately from the FCS200, FC300, and MASS 2100.

Function:

The following functions are available for selection:

• Measure mass flow rate, volume flow rate, density, temperature, and component flow rate

Two built-in integrators can freely set the accumulation of mass, volume, and composition

1 frequency/pulse/batch output, 1 two-stage batch output, 1 digital input

• Removal of small flow signals

Air traffic control inspection

The interference filter can be set according to different applications

• Simulation function

Two stage batch controller

• Automatic zero point adjustment with zero point valuation feedback

• Limit function

• Comprehensive status and fault reporting