Melt blown fabric machine heater

Product description: The heating tube of the meltblown fabric machine and the mask machine are electric heating tubes installed by punching holes or slotting the mold. Then the head is fixed by the nose, which serves as a stabilizing function. The commonly used embedded mold single head electric heating tube is usually a straight rod, bent at a right angle, and there are also mask machine heating tubes with fixed blocking plates. The heating tube of the mask machine adopts imported manufacturing technology, with beautiful appearance, long service life, and high cost-effectiveness.

The meltblown fabric machine heater is a hollow heating tube composed of inner and outer stainless steel, nickel chromium heating wire, magnesium oxide powder, lead wire, etc. The center is hollow and can accommodate various products that need to be heated, such as textile threads

Heating products such as iron wire and metal wire

Main uses of the product: spinning thread heating, cotton thread heating, etc. (can increase the flexibility of spinning thread), and can also heat other objects with a copper tube wall at the center

Providing good thermal energy conduction before spinning can increase the efficiency of spinning and weaving. (The effect is more obvious when used in winter)

The mask machine heating tube refers to a single head heating tube with a surface load of 6W/cm2-15W/cm2. The medium density single head heating tube can also be said to be an AA grade single head heating tube. The mask machine heating tube is generally made of imported 321 seamless tube from Germany due to its surface load. The imported process has a higher cost than the domestic series. The single head heating tube refers to a metal tubular single head heating tube. The mask machine heating tube is made by placing a spring electric heating wire into a metal protective tube and uniformly filling the gap with modified alumina powder with good thermal conductivity and insulation properties. After shrinking by a shrinking machine, the electric heating wire is insulated from the air and does not deviate from the center position and collide with the tube wall. Made through processes such as annealing, bending, and welding fasteners.