-
E-mail
pengbo@szpbjc.com
-
Phone
13528802857，18620306098
-
Address
Room 1106, No. 39, Laiwu East District, Dalang Street Office, Longhua District, Shenzhen City, Guangdong Province
Product Categories
Shenzhen Pengbo Testing Equipment Co., Ltd
Mobile phone controlled drop testing machine (full cover type)
NegotiableUpdate on 01/31
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Mobile phone controlled drop testing machine (full cover type) This device can fix small and lightweight products such as mobile phones in a certain posture and drop them from any height to test the impact resistance of the product
Product Details
Mobile phone controlled drop testing machine (full cover type)
This device can fix small and lightweight products such as mobile phones in a certain posture and drop them from any height to test the impact resistance of the product. Meet the YD/T1539-2006 standard. The test sample should be left unpackaged and equipped with the corresponding battery. It should be placed at a height of (1.0 ± 0.01) m without being turned on and freely dropped onto the marble surface. The visible area of the display screen should not be less than 40% of the front surface area of the chassis or 25cm2The mobile communication phone should be able to fall freely on the marble surface from a height of (0.5 ± 0.005) m, with two drops on each side, for a total of 12 drops on 6 sides. Except for surface scratches and small pits, the function, appearance, and assembly should meet the requirements of relevant standards.
Main features:
l Can achieve repeated drops in product orientation angles;
l Touch screen LCDControl the large screen, perfect human-machine interface operation;
l The number of drops can be set,PLCProgrammable control, automatically stops upon completion;
l Imported motors, cylinders, etc., with stable performance and long-lasting durability;
l Compliant with YD/T1539-2006、 GB/T2423.8-1995、IEC60068-2-32Standard.
Technical parameters:
l Maximum weight of test sample:5kg；
l Falling height range:300mm～1800mm；
l Falling height setting: ruler and setting pointer/Digital display;
l Drop method: The sample can be dropped at any angle,The fixture falls with the sample;
l Test sample grasping method: pneumatic suction cup type;
l Installation area of testing machine:wide900*long450mm；
l Testing machine size:L600 * D550 * H2450mm；
l Weight of testing machine: approximately80kg；
l power supply/Power:AC220V/0.5KW.
Main components:
l Motor control;
l Belt pulley: 1 set;
l Vacuum suction cups: 3 pieces;
l Straight guide rod 2 meters long: 4 pieces;
l PLCControl system: 1 set;
l Vacuum generator: 1 set;
l Marble floor: 1 piece;
l Control program, motherboard, circuit: Developed by Pengbo.
Similar Product Recommend
