Model of trolley oven

Model of trolley oven

Technical Specifications:

1. Model: SC/GW-36A

2. Inner container size: 1200mm * 2000mm * 1500mm (width * depth * height) (customized according to requirements)

3. Dimensions: Width 1580+Control cabinet width 250 * 2180 * height 2050+Motor height 270mm (width x depth x height) (customized according to requirements)

4. Working temperature range: Room temperature~300 ℃

5. Use the highest temperature: 230 ℃

6. Design the highest temperature: 300 ℃

7. Temperature fluctuation: ≤± 1 ℃

8. Temperature uniformity: ≤± 2.5%

9. Operating voltage: 380V/50HZ

10. Heating power: 36KW

11. The external dimensions of the trolley are approximately 1000mm * 1800mm * 1400mm (width * depth * height)

12. Working environment temperature:+5-40 ℃

13. Timing range: 1 to 9999 minutes

14. Heating rate: Raise to 230 ℃ within 60 minutes

15. Circulating system: High temperature resistant and low-noise motor Multi blade centrifugal wind turbine

Model of trolley oven

Material for box production:

1. Outer wall material of the box: Q235 cold-rolled steel plate with a thickness of 1.2mm, sheet metal bending, welding, rivet splicing, spray coating (color optional)

2. The material of the box body fan plate is SUS304 stainless steel plate with a thickness of 1.0mm. The sheet metal bending machine is used for punching

3. The material of the box air duct is SUS304 stainless steel plate with a thickness of 1.0mm. The plate metal is bent, welded, and riveted for splicing

4. Box frame material: 6 # channel steel

5. Box reinforcement material: 5 # angle steel, locally bent with 2mm steel plate

6. Material of the bottom load-bearing frame of the box: 6 # channel steel

7. Material of the top frame of the box: 4 # angle steel

8. Insulation layer thickness and material: 90K grade high-density aluminum silicate fiber filling (insulation layer thickness of 90mm)

9. Bottom fixing: Four iron feet fixed (optional casters)

Door production method:

1. Outer wall material: Q235 cold-rolled steel plate with a thickness of 1.2mm, sheet metal, bent welding, rivet splicing

2. Door inner wall material: SUS304 stainless steel plate with a thickness of 1.0mm sheet metal, bent, welded, and riveted for splicing.

3. Number of doors: single door, 2 double doors

4. Door thickness: 100mm

5. Door latch: alloy hinge and sheep horn pull rod

6. Door frame sealing material: High temperature resistant foam silicone rubber strip compression seal (with good sealing performance and easy cleaning)

Oven protection system:

When there is an abnormal change in the temperature inside the furnace, the second set of temperature alarm system will issue an audible and visual alarm and automatically cut off the heating power supply

2. The motor and heating interlock control means that the blower is driven first and then heated to prevent the heater from burning out and causing accidents

3. Motor overload protection to prevent motor burnout and tripping

4. Short circuit protection for electric heaters to prevent them from burning out due to short circuits

5. Control circuit protection to prevent circuit short circuits and accidents

6. Circuit breakers prevent overloading and short circuits in the main circuit, which can cause accidents

7. Preventing damage to baked goods caused by increased baking time after power outage and subsequent power outage