Multi functional tensile machine (computer 100N-5kN)

The JPL series computer-controlled multifunctional electronic tensile machine has high resolution accuracy and a system accuracy of no more than 0.5%. The tensile machine has very obvious functional characteristics and is suitable for testing the tensile, compressive, bending, shear tearing, peeling, and adhesive forces of metal and non-metal materials such as rubber, plastic, leather, wire and cable, fabric, fiber, paper, film, cord, canvas, non-woven fabric, and steel wire.

1. Execution standard: HG2369-92 GB/T16491-2008

2. Stretching speed: 0-500mm/min

3. Upper limit of gripper travel: 900mm

4. Automatic elongation tracking: 870mm

5. Extension automatic tracking error: ≤ 1% of the displayed value

6. Voltage: 220V ± 10%

1. After the experiment is completed, the fracture will be automatically identified and the fixture will automatically return to its initial position;

2. After the computer controls the test instructions, the system automatically resets to zero;

3. By replacing different fixtures, different experiments can be conducted;

4. Switch between different levels based on the size of the load;

5. The test speed can be changed arbitrarily;

6. Test methods such as test force, test speed, displacement, strain, etc. can be selected;

7. Record test data throughout the entire process. Provide functions such as saving, comparing, and tracking services, allowing users to easily find the force values and deformation data of the test curve point by point using the mouse for analysis, and to zoom in and compare locally;

8. Equipped with automatic limit and overload protection functions;

9. Automatically calculate test results and make arbitrary modifications to the report;

10. Automatically measure displacement stroke and elongation between marks.