Mycenter-HX1000i

The linear axis is driven by twin-screw twin motors and has a dual motor simultaneous positioning patent, allowing the linear axis to achieve a feed speed of 36m/min without losing positioning accuracy (linear axis positioning accuracy ± 2 μ/total length, repeatability accuracy ± 1 μ)

• The linear axis is driven by twin-screw and twin motors, and has a patent for dual motor simultaneous positioning, allowing the linear axis to reach36m / minFeed speed without sacrificing positioning accuracy

(Linear axis positioning accuracy ±2μ/Full length, repeatability accuracy ±1μ).

• Energy saving4A double-sided constrained spindle with variable speed, low speed, high torque, high speed, and high output using segmented gears.

• The high shock absorption and high rigidity hard rail sliding surface with thickened heat treatment layer is the world's only hard rail with a five-year warranty.

• Standard combinationX、Y、ZAxial optical ruler.

• BThe shaft is a toothed disc type1° division(Optional optical ruler can be changed to0.001Degree division and simultaneous movement of four axes).

• Standard combination screw center cooling system and thermal displacement correction systemIAC(Intelligent AdvanceControl)

• .persistTGA(True GeometricAccuracyTrue geometric accuracy)Assembly, using the scratch engineering of the contact surface of the main components to achieve mechanical perpendicularity and parallelism, without using

NC
	Device correction.
Machine capability	Mycenter-HX1000i
X-axis movement (left and right of the moving column)	2040mm
Y-axis movement (up and down of spindle head)	1320mm
Z-axis movement (front and rear of workbench)	1370mm
X-axis positioning speed	36000mm / min
Y-axis positioning speed	36000mm / min
Z-axis positioning speed	36000mm / min
B-axis indexing speed	90°：3.5sec / 180°：5sec
Work area of the workspace	1000mm × 1000mm
spindle speed	20 ~ 8000min-1 [35 ~ 12000min-1]
spindle taper	NST No.50
Tool to Tool/Min. Chip to Chip exchange time	3 / 7 sec
X. Y and Z axis positioning accuracy	± 0.002mm/full stroke
X. Y-axis and Z-axis repeatability accuracy	2

±0.001mm

Number of work disks

Note: The values in [] are optional.

The above specifications may vary due to the manufacturer's improved model, and the actual specifications quoted by our company shall prevail. For detailed specifications, please feel free to contact our company