Mycenter-HX1250i

The linear axis is driven by twin-screw twin motors and has a dual motor simultaneous positioning patent, allowing the linear axis to achieve a feed speed of 36m/min without losing positioning accuracy (linear axis positioning accuracy ± 2 μ/total length, repeatability accuracy ± 1 μ)

• The linear axis is driven by twin-screw and twin motors, and has a patent for dual motor simultaneous positioning, allowing the linear axis to reach36m / minFeed speed without sacrificing positioning accuracy

(Linear axis positioning accuracy ±2μ/Full length, repeatability accuracy ±1μ).

• Energy saving4A double-sided constrained spindle with variable speed, low speed, high torque, high speed, and high output using segmented gears.

• The high shock absorption and high rigidity hard rail sliding surface with thickened heat treatment layer is the world's only hard rail with a five-year warranty.

• Standard combinationX、Y、ZAxial optical ruler.

• BThe shaft is a toothed disc type1° division(Optional optical ruler can be changed to0.001Degree division and simultaneous movement of four axes).

• Standard combination screw center cooling system and thermal displacement correction systemIAC(Intelligent AdvanceControl)

• .persistTGA(True GeometricAccuracyTrue geometric accuracy)Assembly, using the scratch engineering of the contact surface of the main components to achieve mechanical perpendicularity and parallelism, without using

NC
	Device correction.
Machine capability	Mycenter-HX1250i
X-axis movement (left and right of the moving column)	2040mm
Y-axis movement (up and down of spindle head)	1320mm
Z-axis movement (front and rear of workbench)	1370mm
X-axis positioning speed	36000mm / min
Y-axis positioning speed	36000mm / min
Z-axis positioning speed	36000mm / min
B-axis indexing speed	90°：3.5sec / 180°：5sec
Work area of the workspace	1250mm × 1250mm
spindle speed	20 ~ 8000min-1 [35 ~ 12000min-1]
spindle taper	NST No.50
Tool to Tool/Min. Chip to Chip exchange time	3 / 7 sec
X. Y and Z axis positioning accuracy	± 0.002mm/full stroke
X. Y-axis and Z-axis repeatability accuracy	2

±0.001mm

Number of work disks
Note: The values in [] are optional.