Network lightning arrester GS-X-RJ45 [beam lightning protection]

NegotiableUpdate on 04/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Model: GS-X-RJ45 Network Lightning Protection Device: A single channel computer network signal lightning protection device that protects network signals and effectively absorbs the energy impact generated by power surges, and introduces the energy into the ground through grounding cables. Integrated design reduces protection costs and installation difficulty, saves installation space, and selects corresponding products according to different usage locations and system parameters. Main parameters: 1-channel network line protection, transmission rate of 100M, nominal discharge current of 5KA, RJ45 input and output interfaces

Product Details

Product · Display

Source manufacturer of beam lightning surge protector

通讯信号防雷器

Installation method

1. Installed in series between the lines of the protected equipment, the interface connection must be reliable, and the network signal lightning arrester must be connected upstream and downstream. Connect the output terminal to the protected device, do not connect it in reverse. Otherwise, it will be damaged during lightning strikesNetwork signal lightning arresterThe equipment also lacks effective protection.

2、Grounding wire（PE）It must be reliably connected to the ground wire of the surge protection system, and the minimum length is required to achieve the best protection effect.
Installation precautions
1. During installation, the power must be disconnected and live operation is strictly prohibited. The connecting wires must meet the requirements.
2. After installation, insert the lightning protection module into place and check if it works properly.
3. The lightning arrester does not require special maintenance, it only needs to be regularly checked for loose connections and normal status indicators