Ningbo Salt Spray Testing Machine Salt Spray Test Chamber

Ningbo Salt Spray Testing Machine Salt Spray Test Chamber Product Description

The Ningbo Salt Spray Testing Machine Salt Spray Test Chamber can be used to assess the salt spray corrosion resistance of materials and their protective layers, as well as to compare the process quality of similar protective layers. It can also be used to assess the salt spray corrosion resistance of certain products. The equipment can reach any temperature point between room temperature and 55 ℃ in the experimental workspace and maintain a constant temperature.

The material used to manufacture this equipment is corrosion-resistant imported PVC plastic sheet, which does not affect the test results. In the design work of this equipment, the internal and external pressures are balanced, and salt spray will not directly spray onto the sample. Moreover, the design takes into account the generation of condensation water at the top, inner walls, and other parts of the equipment. Therefore, during the testing process, condensation water will not drip onto the sample and affect the test results.

This equipment is equipped with the test solution preparation method specified in the national standard.

Technical Description of Ningbo Salt Spray Testing Machine Salt Spray Test Chamber
Internal dimensions: 600 × 450 × 400 (L × W × H) mm

External dimensions approximately: 1075 × 630 × 1185 (L × W × H) mm

Temperature range: RT+5 ℃~35 ℃

Humidity range: 85-90% R · H

Air saturator: RT+10 ℃~47 ℃

Temperature uniformity: ± 2 ℃

Temperature fluctuation: ± 0.5 ℃

L spray sedimentation: 1 ～ 2ml/80cm2 · h

L spray mode: continuous/periodic optional

Total power: 2KW

Heating and spray System Control of Ningbo Salt Spray Tester Salt Spray Chamber

The salt spray test chamber of the Ningbo salt spray testing machine adopts a U-shaped alloy rapid heating electric heating tube, which is a completely independent system. Does not affect the salt spray test and control circuit. The output power of temperature control is calculated by a microcomputer to achieve accuracy and efficiency in electricity consumption;

L Tower spray (with adjustable tower tip);

The nozzle is made of specially made quartz glass and fired;

L spray mode: continuous, interval optional;

Test timing range: 0-999 hours, minutes, seconds, any setting.

L Test box overheating and water shortage protection

Saturator over temperature and water shortage protection

Experimental operation instructions

End of experiment indication

Saturator liquid level observation display

External observation of salt spray deposition shows

Heating and spray system control

The salt spray test chamber of the Ningbo salt spray testing machine adopts a U-shaped alloy rapid heating electric heating tube, which is a completely independent system. Does not affect the salt spray test and control circuit. The output power of temperature control is calculated by a microcomputer to achieve accuracy and efficiency in electricity consumption;

L Tower spray (with adjustable tower tip);

The nozzle is made of specially made quartz glass and fired;

L spray mode: continuous, interval optional;

Super salt water tank can continuously spray for 72 hours without adding salt water

Standard installation equipment:

12 V-shaped/O-shaped storage racks and 1 measuring cylinder

Three temperature indicator needles, two needles, four collectors, one needle

Five glass nozzles, one tube, six humidity cups, one tube

Seven glass filters, one eight spray tower, one set

One set of nine automatic water addition system and one set of ten defogging system

enclosure:

Two bottles of test drug sodium chloride (500g/bottle)

1 copy of operation manual

1 5L measuring cup