Offshore platform pneumatic cleaning machine

Offshore platform pneumatic cleaning machinesummary:

The mobile high-pressure water cleaning device independently developed by the company adopts imported high-pressure ceramic plunger pump, reducer, pneumatic motor, and frame structure It has anti-corrosion, rust proof, explosion-proof, small size, light weight, long service life, reasonable structure, easy operation, safe and reliable operation, etc This cleaning machine is powered by compressed air and drives a high-pressure water pump. Through a high-pressure water pipe and a high-pressure water gun, a high-pressure water column is sprayed to clean various types of machinery and equipment. The cleaning machine is relatively safe and reliable, and can meet the requirements stipulated in the Safety Law. Due to the use of compressed air as a power source, it does not generate hazardous factors such as electric sparks, making it particularly suitable for use in places with high safety and explosion prevention requirements such as petroleum, chemical, coal mining, flammable, explosive, high temperature, humidity, dust, etc. It can also be used for emergency firefighting and extinguishing in emergency situations.

Offshore platform pneumatic cleaning machineWorking principle: Compressed air enters the pneumatic motor through the ball valve and pneumatic unit triple piece, and high-pressure air pushes the blades of the pneumatic motor, driving the output shaft of the pneumatic motor to rotate. After the pneumatic motor is started, the high-pressure plunger pump starts to work. Water enters the high-pressure pump through the filter screen, and under the action of the pump piston, high-pressure water is generated through the high-pressure soft water pipe and sprayed out by the high-pressure water gun for cleaning work. You can hold the spray gun with one or both hands. When the trigger of the spray gun is pressed under high pressure, the high-pressure valve will be opened, and high-pressure water can be sprayed from the spray gun to start cleaning. When the index finger releases the trigger, the high-pressure valve is closed, the high-pressure water stops spraying, and the cleaning work stops 4、 Main technical parameters: Pneumatic motor: Rated power: 10KW Speed: 800RPM Air consumption; 1m3/min Working pressure: 0.6mpa High pressure pump: Working pressure: 20mpa Flow rate: 15 liters/min

Offshore platform pneumatic cleaning machineUsage and maintenance: Installation: 1. The water supply system of the high-pressure pump must avoid air entering to ensure the normal use of the pump and prevent damage to its components. Connect the high-pressure hose to the compressed air pipeline first, and the high-pressure pipeline should not be too long. Before connecting the high-pressure hose to the cleaning machine, open the compressed air valve and wait for the debris and moisture inside the high-pressure hose to be blown away before connecting the high-pressure hose to the cleaning machine. 2. When used for water storage tank supply, a hose with a length of less than 3 meters should be used for the suction pipeline, the water level should be set higher than the height of the pump, the supply temperature should be below 50 ℃, and the inlet pipe, high-pressure water pipe, and water gun should be installed (do not forget the sealing rubber ring at the suction filter and pipe interface). 3. Alkaline, acidic, or corrosive liquids are not allowed to be used for high-pressure pumps, and all components should not be in a dry state. Before use, remove the oil cap on the high-pressure pump, inject new SAE20W-50 or the same lubricating oil, and add it to the oil level indicator. The oil level should not be lower than the marked line, but not higher than 5mm. After the first 50 hours of use, all lubricating oil should be replaced, and then every 200 hours. 4. Pneumatic motors should be regularly inspected and maintained according to their usage to extend their service life. The maintenance period is generally 3-6 months. 5. Check the gas water separator and oil mist device. The oil level should be above the marked scale line. Lubricating oil should be selected from 20 # to 30 # mechanical oil, and the oil mist device should drip 20-30 drops per minute. 6. The working pressure of the pneumatic motor of the cleaning machine is 0.4-0.5Mpa. (Observing the displayed value of the barometer)

Offshore platform pneumatic cleaning machineOperation 1: The operation of the high-pressure pump is not allowed to exceed the specified pressure, flow rate, and speed. Before operating the high-pressure pump, the pressure regulating valve should be relaxed first, and then the pressure should be gradually increased as needed after operation. Open the compressed air valve, the pneumatic motor starts running, and the water pressure gauge at the outlet shows an increase in water pressure. Press the trigger of the high-pressure water gun to release high-pressure water. Adjusting the adjustment sleeve on the high-pressure water gun can adjust the range of the water. After the operation is completed, please turn off the compressed air pipeline switch. After the equipment air source is turned off and stopped running, press the trigger of the water gun again to release the pressure in the pipeline and water pump. 2. If any malfunction or abnormal sound is detected during use, the machine should be stopped immediately for inspection.