One click measuring instrument BL-100/65/30

On site demonstration testing hotline： The one click rapid measuring instrument has overturned the traditional measurement mode and opened up a new era of rapid measurement. One click size measuring instrument can significantly improve operational efficiency and save costs
To obtain greater profits for you. Just one click, instantly measure all dimensions. Using efficient and accurate image processing algorithms, under the independently developed optical system, we adopt
High resolution CCD and telecentric lens capture images, and through software systems for image processing and analysis, the required dimensions of the workpiece can be accurately measured.
The design of the aluminum shell, whether it is the curved structure or color matching, can give people a comfortable feeling. Scope of application: Suitable for rapid measurement of hardware, plastic parts, precision small workpieces, springs, spring clips, and film cutting productsZhongshan Lifeng machine parameters:1. Automatic image registration function, no need to locate workpieces, no need for fixtures, products can be placed freely, achieving automatic recognition and measurement; Can recognize multiple simultaneously 2Measure the workpiece and perform measurements, output the results500The image sensor adopts German Basler high-definition technologyTen thousand pixelsCCD, paired with itGigeGigabit Ethernet card (transmission rate:1G/S ） Make the imaging clear and the picture quality delicate;3. Adopting ItalyOPTO Bilateral telecentric lenses, paired with parallel telecentric transmission light (transmission system) and programmable four zone annular shadowless spotlights(Falling system), coaxial falling light, and low angle shadowless falling light (special light source) ensure the authenticity, stability, and observability of the product imaging required for measurement,Make the measurement data very close to the true value, and the repeated measurement data is also very stable, so that the operator will not doubt the measurement results due to significant data differences.4. Adopting the UKbinocus The instrument controller produced by technology (divided into internal and external models) can be directly connected tobinocusSoftware matching enables the use of instruments Lighting control, workbench movement control, and camera exposure control have become very simple and easy to operate.5. The internal skeleton and workbench of the whole machine are made of aviation aluminum profiles to ensure the stability of the instrument; The outer cover adoptsABS

1	Blister plastic shell, natural non-toxic, clean and beautiful.		6. Adopting the UK		binocus		Professional one click measurement software with powerful functions and intuitive operation, combined with testing and adjustment by domestic software engineers,
2	Make software operation more user-friendly; And we promise to make corresponding software modifications according to the measurement requirements raised by customers.		vision		100x80mm		Image sensor
3	Industrial CCD 5 million pixels		repeatability accuracy		±1um		lens
4	Bilateral telecentric lens		measurement accuracy		±5um		light source
5	LED parallel light source (green)		display unit		0.1um		mechanical structure
6	aviation aluminum		working distance		120mm		machine weight
7	9Kg		Dimensions (W * D * H)		300x400x700mm		Camera interface

1G Gige Gigabit Ethernet

temperature range

20±5℃ 1℃/h 2℃/24h 1℃/m

humidity

40%-70%

Product Features:

1. Adopting a high magnification lens and a 5-megapixel high-resolution industrial camera Can make the image of the object being measured clearer.

|2. Dual telecentric optical path lens technology, combined with a high brightness LED parallel light system and sub-pixel processing with powerful measurement software,

It can quickly solve distortion, distortion and other phenomena during product imaging. Without such technical processing, the lens will generally experience shadows, distortion, distortion and other phenomena.

|3. The device is not affected by high and low focal lengths, and the imaging of the product after adjusting the focal length is a clear, shadowless, and undistorted high-definition flat view. Clear and clear imaging.

4. The software can achieve fast one key measurement, and any shortcut key can be set. Simply press the shortcut key to complete the set data measurement.

5. Large field of view measuring lens, with a size of 100mm, can meet the needs of the vast majority of customer workpieces.

6. Measurement accuracy: The repeatability accuracy can reach ± 1 μ m

7. The software can accurately capture the lines of the measurement position and automatically remove burrs from the workpiece.

8. The workpiece does not need to be straightened, and in the large field of view mode, it can accurately and automatically capture measurement areas such as circles, lines, and arcs, and label the dimensions.

9. When multiple workpieces are measured simultaneously within the same diameter field of view, there is no need to straighten the workpieces. After setting up the program, the software can automatically recognize and achieve precise capture and measurement.	10. Automatically generate detailed SPC data reports, including detailed data, automatic evaluation of NG and OK products after setting tolerance values, as well as analysis of product defect rates
Analysis of PPK, PP, CPK, CA, CP, etc. At the same time, it also generates control curve graphs and so on.	11. High efficiency of small machine: although the volume of the instrument is small, the efficiency is far more than that of more than 10 ordinary anime simultaneous operations
One click measuring instrument	12. Some functions are even more user-friendly than the Japanese Keyence one click measuring machine.
Software Function Introduction:	Basic measurement function
Point, line, circle, multi-point line, multi-point circle, automatic circle, spline curve, arc, multi segment circle, automatic R-angle	Annotation function
Alignment annotation, vertical annotation, angle annotation, radius/diameter annotation, area annotation, thread pitch diameter annotation	Geometric tolerance
Straightness, roundness, symmetry, contour, etc	Virtual Construction
Centerline, bisector, tangent point, circular tangent point, circular center, line center, * * * high point, * * * low point	Parameter Settings
Font, color, recognition mode, tolerance size, operation permission	Reporting function
SPC analysis report (CPK, CA, PPK, CP, PP values, process capability analysis, X control chart, R control chart)	Software customization

CAD import contour curve analysis, automated management link, APP management applicationdetection quantity100 data per secondNumber of templatesunlimited

drive modeProgrammable motor1. The software has been verified through surface compensation, and the repeatability accuracy of measuring standard parts can reach

0.001mm

Repeated measurement of product accuracy can ensure<0.005mm；

2. The basic software settings (such as verification data, camera parameter settings, light source settings, and scale parameters) are saved in

config

In the file, it can be directly called and used,No need for customers to make complicated initial settings.3. The programming is simple, similar to the operation mode of anime manual measurement. After programming, it is directly registered and saved as the product name. The path can be saved according to the customer's intention,When calling the program, clicking on the program name will display a photo of the corresponding program product in the image area, making it easier for customers to identify whether it is the program they need to call. Additionally, it has been addedThe "search" function allows you to enter the program name in the search area, and the software will gradually find the corresponding program based on the entered text; And the saved program will not be affected by software or computer issuesUnable to use due to changes, after replacing the computer or reinstalling software, the previous programming can be opened and used without any settings.4. The software measurement function is powerful. In addition to basic line drawing, distance, angle, radius and diameter measurement, it also adds features such as finding the highest point, intersection point, contour scanning, and electronic measurementcaliper、Functions such as area, contour, longest distance, shortest distance, center distance, etc.5. Added the function of programming different regions of the same product separately. After programming the same product, it can be saved separately in its subdirectories such as: top, leftBy calling a program with six domain names on the right, different domains of the same product can be measured, and even the same product can be placed differently on the instrument workbenchRegion, then directly call the domain program under the subdirectories, and the software can perform corresponding measurements.

6. Programming modification is simple. If there are problems with the previously written program or changes in the product settings, you can call out the program and click the "Edit" function key to proceed with the program
Modify, click "Save" after making the changes.
7. The report function is powerful, it can set product tolerances and automatically determine whether it is qualified or unqualified; can be performed
CPK
analysis; You can save the commonly used tables that have been set up in
In the 'Public Reports' section, it can be accessed directly when needed; Customers can do it themselves
EXCEL
Import the parent table into the report and directly output the measurement data to the specified location
Cells and analyze them in the report. The format for saving reports is:
PDF
The
DOC
The
XLS
The
TXT
Wait.
Effective improvement of work efficiency and profit: Batch testing requires only two steps: placing the measurement object on the coordinate table and pressing the start measurement button,
Instantly measure multiple dimensions. Not only can it quickly measure a single product, but it can also quickly detect all identical targets visible within the field of view, measuring multiple workpieces at once.
No human error: