Online VOC gas detection alarm

MIC-600Online VOC gas detection alarm24-hour continuous online monitoring of gas concentration and temperature and humidity measurement for on-site volatile organic compounds, on-site display of concentration and sound and light alarms for exceeding standards, remote data transmission. Adopting a 2.5-inch high-definition color screen to display concentration in real time, and selecting the best brands of electrochemical, infrared, catalytic combustion, thermal conductivity, PID photoionization principle gas sensors in the industry according to different detection gases, as well as high-precision capacitive digital temperature and humidity sensors from Switzerland, MIC-600 advanced circuit design and mature core algorithm processing, a new generation of multifunctional fixed online composite gas detection alarm has been born. The MIC-600 can detect gas concentrations in pipelines, confined spaces, and atmospheric environments, as well as detect gas leaks and the purity of high concentration single gases. The sturdy and durable explosion-proof shell and fluorocarbon paint surface treatment process are suitable for various hazardous areas and corrosive environments with strong acids and alkalis. They are wear-resistant and will not fade or peel off the paint within 10 years.

Online VOC gas detection alarmparameter

Gas detection: volatile organic compounds, optional: can simultaneously detect up to 4-6 gas concentrations and temperature and humidity

Detection range: 0~1, 10, 100, 1000, 2000, 10000, 20000ppm optional, other ranges can be customized

Resolution: 0.01ppm or 0.001ppm (0-10ppm); 0.01ppm (0-100ppm), 0.1ppm (0-1000ppm), 1ppm (above 0-1000ppm)

Detection principle: PID photoionization, can also be customized according to gas type, range, on-site environment, and user needs

Sensor lifespan: PID 2 years, electrochemical principle 3 years, oxygen 2 or 6 years, infrared 5-10 years, catalytic combustion 3 years, thermal conductivity 5 years

Temperature detection: -40 ℃~+120 ℃ (optional), humidity detection: 0-100% RH (optional), resolution: temperature 0.1 ℃, humidity: 1% RH

Detection accuracy: ≤± 2% F.S (2% over full range), temperature 0.5 ℃, humidity 3% RH, higher accuracy can be customized

Working mode: fixed installation, online detection, diffusion measurement, pipeline type (M45X1.5 external thread), flow type, pump suction optional

Installation methods: pipeline type, wall mounted type. The working pressure of pipeline type is atmospheric pressure ± 30%. If it exceeds the range, it needs to be depressurized

Response time: T90 ≤ 20 seconds

Recovery time: ≤ 30 seconds

Output signal: Bus based RS485 (RTU), three (four) wire system 4-20mA, optional 0-20mA, 1-5V, 0-5V, 0-10V, wireless transmission

Alarm mode: on-site sound and light alarm (optional), default 1 channel, optional 3 passive contact (dry node) outputs, three-level alarm, alarm points can be set

Working environment: -40 ℃~+70 ℃

Sample gas temperature: -40 ℃~+70 ℃ (conventional), optional: -40 ℃~+400 ℃, -40 ℃~+800 ℃ (up to 1300 ℃)

Relative humidity: ≤ 10-95% RH (conventional) for non condensing applications, optional: 10-99% RH for high temperature and high humidity applications. Please specify when ordering, and a pre-treatment system is required

Working voltage: 12~36V (DC, standard power supply for a single device is 24V, 1A or greater DC switching power supply)

Power reference: A 24V, 2.1A switch power supply can drive 40 toxic gas detectors or 15 flammable and infrared gas detectors

Explosion proof form: Explosion proof Exd Ⅱ CT6

Connection cable: Choose a three core shielded cable for 4-20mA, a four core shielded cable for RS485, and a single wire diameter of ≥ 1.5mm when the distance exceeds 1000 meters; the shielding layer is grounded

Electrical interface: 3/4NPT, optional M20X1.5 internal thread, 1/2NPT

Protection level: IP66 waterproof splash and short-term rain. For long-term rain, a rain cover should be selected or a shell without display should be chosen or specified when ordering

Dimensions in inches:

260 × 180 × 90mm (L × H × W) atmospheric chamber

260 × 230 × 90mm (L × H × W) atmospheric chamber with lamp

240 × 180 × 90mm (L × H × W) conventional gas chamber

240 × 230 × 90mm (L × H × W) conventional with light

Weight: 1.8Kg

Optional accessories: wall mounting bracket, mounting bracket fixed on the pipeline (four or six branch), DN50 flange pipeline installation or stainless steel threaded welding seat (specify pipeline size, such as DN50, DN15...), room temperature and high humidity pretreatment system, high temperature and high humidity pretreatment system, high temperature and high humidity and high dust pretreatment system, pressure reducing valve, flow meter, temperature and humidity measurement, large capacity SD storage card, rain cover, 24VDC or 220AC sampling pump (sampling distance of 10 meters), vacuum pump (sampling distance greater than 40 meters), 24V switch power supply.

Accessories required for computer monitoring: free upper computer software, RS485/RS232 converter, USB/RS232 conversion cable for laptops without RS232 interface, and TCP/IP converter for network transmission.