Online ethylene gas detection alarm

Online ethylene gas detection alarm

The MIC-600 online ethylene detection alarm is applied for 24-hour continuous online monitoring of ethylene gas concentration and measurement of temperature and humidity on site. It displays concentration and over limit sound and light alarms on site, and remote data transmission. Using a 2.5-inch high-definition color screen to display concentration in real time, and selecting gas sensors based on electrochemical, infrared, catalytic combustion, thermal conductivity, PID photoionization principles from well-known brands in the industry according to different detection gases, as well as high-precision capacitive digital temperature and humidity sensors from Switzerland, the MIC-600 advanced circuit design and mature core algorithm processing have given birth to a new generation of multifunctional fixed online composite gas detection and alarm devices. The MIC-600 can detect gas concentrations in pipelines, confined spaces, and atmospheric environments, as well as detect gas leaks and the purity of high concentration single gases. The sturdy and durable explosion-proof shell and fluorocarbon paint surface treatment process are suitable for various hazardous areas and corrosive environments with strong acids and alkalis. They are wear-resistant and will not fade or peel off the paint within 10 years.

Online ethylene gas detection alarmparameter

Gas detection: Ethylene (C2H4), optional: up to 4-6 gas concentrations and temperature and humidity can be detected simultaneously

Detection principles: electrochemistry, infrared, thermal conductivity, PID photoionization, catalytic combustion, depending on gas type, range, on-site environment, and user requirements

Sensor lifespan: electrochemical principle 2-3 years, oxygen 2 years or 6 years optional, infrared 5-10 years, catalytic combustion 3 years, thermal conductivity 5 years, PID 2 years

Detection range: 0-10ppm, 100, 1000, 2000ppm, 100% LEL, 100% Vol optional, other ranges can be customized

Resolution: 0.01ppm or 0.001ppm (0-10ppm); 0.01ppm (0-100 ppm), 0.1ppm (0-1000 ppm), 1ppm (above 0-1000 ppm), 0.1% LEL (0-100% LEL), 0.01% Vol or 0.001% Vol (0-99.999% Vol)

Temperature detection: -40 ℃~+120 ℃ (optional), humidity detection: 0-100% RH (optional), resolution: temperature 0.1 ℃, humidity: 1% RH

Detection accuracy: ≤± 2% F.S (2% over full range), temperature 0.5 ℃, humidity 3% RH, higher accuracy can be customized

Detection methods: fixed installation, online detection, diffusion measurement, pipeline type (M45X1.5 external thread), flow type, pump suction type optional

Installation methods: pipeline type, wall mounted type. The working pressure of pipeline type is atmospheric pressure ± 30%. If it exceeds the range, it needs to be depressurized

Response time: T90 ≤ 20 seconds

Recovery time: ≤ 30 seconds

Output signal: Bus based RS485 (RTU), three (four) wire system 4-20mA, optional 0-20mA, 1-5V, 0-5V, 0-10V, wireless transmission

Alarm mode: on-site sound and light alarm (optional), default 1 channel, optional 3 passive contact (dry node) outputs, three-level alarm, alarm points can be set

Working environment: -40 ℃~+70 ℃

Sample gas temperature: -40 ℃~+70 ℃ (conventional), optional: -40 ℃~+400 ℃, -40 ℃~+800 ℃ (up to 1300 ℃)

Relative humidity: ≤ 10-95% RH (conventional) for non condensing occasions, optional: 10-99% RH for high temperature and high humidity occasions, when ordering

Please note that a preprocessing system is required

Working voltage: 12~36V (DC, standard power supply for a single device is 24V, 1A or greater DC switching power supply)

Power reference: A 24V, 2.1A switch power supply can drive 40 toxic gas detectors or 15 flammable and infrared gas detectors

Explosion proof form: Explosion proof Exd Ⅱ CT6

Connection cable: Choose a three core shielded cable for 4-20mA, a four core shielded cable for RS485, and a single wire diameter of ≥ 1.5mm when the distance exceeds 1000 meters; the shielding layer is grounded

Electrical interface: 3/4NPT, optional M20X1.5 internal thread, 1/2NPT

Protection level: IP66 waterproof splash and short-term rain. For long-term rain, a rain cover should be selected or a shell without display should be chosen or specified when ordering

Dimensions in inches:

260 × 180 × 90mm (L × H × W) atmospheric chamber

260 × 230 × 90mm (L × H × W) atmospheric chamber with lamp

240 × 180 × 90mm (L × H × W) conventional gas chamber

240 × 230 × 90mm (L × H × W) conventional with light

Weight: 1.8Kg

Optional accessories: wall mounting bracket, mounting bracket fixed on the pipeline (four or six branch), DN50 flange pipeline installation or stainless steel threaded welding seat (specify pipeline size, such as DN50, DN15...), room temperature and high humidity pretreatment system, high temperature and high humidity pretreatment system, high temperature and high humidity and high dust pretreatment system, pressure reducing valve, flow meter, temperature and humidity measurement, large capacity SD storage card, rain cover, 24VDC or 220AC sampling pump (sampling distance of 10 meters), vacuum pump (sampling distance greater than 40 meters), 24V switch power supply.

Accessories required for computer monitoring: free upper computer software, RS485/RS232 converter, USB/RS232 conversion cable for laptops without RS232 interface, and TCP/IP converter for network transmission

Application scenarios: Petroleum, chemical, pharmaceutical, environmental protection, flue gas analysis, air treatment, and all other applications that require fixed installation and online detection of gas concentration