Orifice flowmeter manufacturer

NegotiableUpdate on 01/04

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The orifice flowmeter fills the pipeline with fluid flowing through the throttling device inside the pipeline, causing local contraction near the throttling element, increasing the flow velocity, and creating a static pressure difference on both sides upstream and downstream. Orifice flowmeter manufacturer

Product Details

Valve orifice flowmeter-Orifice flowmeter manufacturerMain Features

The structure of the throttling device is easy to replicate, simple and sturdy, with stable and reliable performance, long service life, and low price.

▲ Orifice plate calculation adopts international standards and processing

▲ Wide application range, all single-phase flows can be measured, and some mixed phase flows can also be applied.

The standard throttling device does not require real flow calibration and can be put into use.

The installation of integrated orifice plates is simpler, without the need for pressure pipes, and can be directly connected to differential pressure transmitters and pressure transmitters.

Intelligent features

▲ Adopting imported monocrystalline silicon intelligent differential pressure sensor

▲ High precision, comprehensive self diagnostic function

The range of the intelligent orifice flowmeter can be self programmed and adjusted.

▲ It can display cumulative flow rate, instantaneous flow rate, pressure, and temperature simultaneously.

▲ In addition to online and dynamic full compensation functions, it also has self diagnosis and self setting range.

▲ Equipped with multiple communication interfaces

▲ High stability

▲ Wide range, greater than 10:1

Intelligent technical indicators

▲ High precision: ± 0.075%

▲ High stability: better than 0.1% FS/year

▲ High static pressure: 40MPa

▲ Work continuously for 5 years without the need for calibration

▲ Temperature and static pressure effects can be ignored

▲ Anti high overvoltage

2. Product structure of valve orifice flowmeter

Composition of throttling device

Throttling components: standard orifice plate, standard nozzle, long diameter nozzle, 1/4 circle, double orifice plate, eccentric orifice plate, circular orifice plate, conical inlet orifice plate, etc. Pressure tapping devices: ring chamber, pressure tapping flange, clamping ring, pressure pipe and other connecting flanges (flanges of national standards, various standards and other design departments), fasteners. Measuring tube

Orifice flowmeter manufacturerProduct Parameters

1. Diameter of the pipeline (diameter * wall thickness)

2. Medium measured by orifice flowmeter

3. Working temperature of the tested medium

4. Working pressure of the tested medium (maximum pressure, minimum pressure, normal pressure)

5. The working flow rate of the tested medium (maximum flow rate, minimum flow rate, normal flow rate)

6. Viscosity of the measured medium

debugging method

1. Connect the signal line and power line

2. Open the inlet and outlet valves, and ensure that the opening of the inlet and outlet valves is consistent

3. Open the stainless steel three valve group balance valve, slowly open the valves at the high and low pressure ends of the orifice plate, and close the stainless steel three valve group balance valve after the fluid passes through the flowmeter.