PW-1A Grinding and Polishing Machine

NegotiableUpdate on 08/03

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Brief introduction: The PW-1A polishing machine is powered by an AC motor controlled by a frequency converter, which is transmitted to the polishing disc through a connecting shaft, thereby driving the polishing disc to operate smoothly. The grinding and polishing disc has a large speed range, which can be infinitely variable within the range of 200-1500r/min to meet the needs of different speeds for pre grinding and polishing metallographic specimens. The PW-1A grinding and polishing machine is equipped with various specifications of grinding and polishing discs for users to place special orders.

Product Details

Details introduction:

PW-1A Grinding and Polishing Machine

Purpose:

PW-1A Grinding and Polishing MachineIt is a powerful device mainly suitable for grinding and polishing various metallographic and lithological samples, for observing and measuring the microstructure of the samples under a microscope.

PW-1A Grinding and Polishing MachineNew AC variable frequency speed regulation technology has been adopted. The PW-1A grinding and polishing machine utilizes a sample holder to perform semi-automatic grinding and polishing operations on multiple samples simultaneously.

Technical parameters:

1. Grinding and throwing disc diameter: 200mm

2. Grinding and throwing disc speed: 50-1500r/min (stepless)

3. Electric motor: Y802-4, 0.75Kw, (B5)

4. Power supply voltage: 220V. A.C, 1PH, 50Hz

5. Dimensions: 770 × 460 × 1140mm

6. Net weight: 77Kg

Overview of structural features:

The polishing machine is powered by an AC motor controlled by a frequency converter, which is transmitted to the polishing disc through a connecting shaft, thereby driving the polishing disc to operate smoothly. The grinding and polishing disc has a large speed range, which can be infinitely variable within the range of 200-1500r/min to meet the needs of different speeds for pre grinding and polishing metallographic specimens.

PW-1A Grinding and Polishing MachineIt consists of basic components such as rack, frequency converter, motor, grinding disc, sample holder, and toolbox. The power switch, speed control knob, and other components of this machine are installed on the control panel in front of the rack for easy operation. In addition to the water pipe and polishing disc, the workbench is also equipped with a semi-automatic polishing sample holder with connecting rods, supports, etc. for pressurization. The electrical control devices are installed inside the left front side of the rack, and can be easily repaired by opening the box door. There is a toolbox on the right side of the rack. Various specifications of grinding discs and grinding reagents can be placed.

PW-1A Grinding and Polishing MachineWe have various specifications of grinding and throwing discs available for users to place special orders.