Parker PARKER solenoid valve PS4135CP is widely used

NegotiableUpdate on 12/10

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The Parker PARKER solenoid valve PS4135CP is widely used as an intermediate rectifier plate for the $r $nGFG 2 valve. In the hydraulic control circuit, if a two-way flow control valve is used in combination with a stacked intermediate rectifier plate, it can control the inlet and return oil flow of the same working chamber of the actuator. Design the structure. The middle rectifier board is designed with four identical, symmetrically arranged one-way valves, so that the pressure difference of bidirectional liquid flow will be the same.

Product Details

Parker PARKER solenoid valve PS4135CP is widely used

The TEA series accumulator oil discharge valve with cutoff function is suitable for hydraulic circuits that require high flow oil discharge from hydraulic accumulators in a short time (millisecond range). Typical applications include injection molding machines, die-casting machines, and hydraulic systems for various types of presses.

Proportional throttle valve with shut-off function, two-way plug-in valve with valve core position feedback, electro-hydraulic proportional throttle valve TDL series

Function; The TDL type proportional throttle valve consists of three stages. The main seat valve is controlled by a hydraulic follower. The position of the pressure follower is determined proportionally by the 0-10V (0-20mA optional) command signal of the main stage valve core. The pressure difference on the main stage seat network following the action of the hydraulic follower can reach the maximum working pressure.

The flow direction is B → A, and the main stage valve has no leakage in its closed position. When the control pressure is greater than 50 bar, the dynamic response is fast.

The accuracy of flow regulation is 0.5% of the nominal flow rate. The maximum working pressure at ports A, B, and X is 350 bar, and the factory set hydraulic opening point is at the input command signal corresponding to 300 mV (0.6 mA optional). Features ● Pilot controlled two-way directional flow control valve ● Two way plug-in valve design

● The installation interface complies with ISO 7368: 1989 ● Suitable for applications with high flow control (such as presses and die-casting equipment) ● Used for speed and position control

DSBC-125-500-PPVA-N3	E3x -zd11
CLR-63-50-L-P-A	E32-DC200 2M
DFM-40-25-B-PPV-A-KF	XALD02
Dsbg- 80 - 320 -ppva-n 3	XB4RFB01
DFM-80-100-P-A-KF	27M2A20A0025S01
DFM-63-50-B-P-A-KF-AJ	8222G088 AC110V
Approaching switch G0SWTCH 7J-1356F-JSP	Kangmaosheng self-control one-way valve VNR-843-07
SMC Pneumatic control triple component AC30A-03-A	E2B-M12LN08-WZ-B1
SMC pressure reducing valve AR20-02-B	FESTO Pilot Check Valve HGL-1/4-B 530031
SDKE-1751/2 DC 10S	FESTO throttle valve HGL-3/8-B
SDHE-0714 DC 10S	6215M0510.4610.024.00
RHI90N-0NAK1R61N-01024	ADVU-32-38-P-A
BI10-P30SK-Y1X	ADVU-32-18-P-A
SAB 50 NBR-60 G3/8-IG	VRA2000-8

Parker PARKER solenoid valve PS4135CP is widely used