Photovoltaic Glass Heat (Moisture) Resistance Test Chamber

1Photovoltaic Glass Heat (Moisture) Resistance Test Chamberpurpose

Suitable for wire and cable, building sandwich, automotive laminated glass, and scientific component industries such as photovoltaics, biology, chemistry, physics, plants, chemicals, hardware, plastic shells, etc. It is used to test the heat resistance of laminated glass and help observe the airtightness and waterproof performance of the tested products

IIPhotovoltaic Glass Heat (Moisture) Resistance Test ChamberTechnical Specifications

1. Model: KM-BL-SZ450

2. Studio size: D × W × H: 450 × 600 × 500 (mm)

3. Outer box size: D × W × H: 550 × 900 × 700 (mm)

4. Temperature range: RT~100 ℃ (boiling temperature of water)

5. Control accuracy: ± 1.0 ℃

6. Display accuracy: 0.1 degrees

7. Uniformity: ± 1.0 ℃

8. Heating time: RT~100 ℃ for about 60 minutes

9. Equipment power supply: AC380V ± 10%, 50Hz

10. Total power of equipment: 4.0KW

IIIPhotovoltaic Glass Heat (Moisture) Resistance Test ChamberStructural characteristics and configuration

1. The test box body is in the form of an integral structure

2. Box material: SUS304 # stainless steel is used both inside and outside, with a thickness of 1.0mm

3. The controller is located on the right side of the box

4. Opening method: Handheld method

5. Drainage method: manual drainage valve

6. Water addition methods: manual water addition and automatic water addition

7. Insulation material: rock wool or polyurethane foam

8. Temperature controller: imported digital temperature controller, automatically calculates PV/SV and displays them simultaneously, with button settings

9. Current controller: SSR solid-state relay

10. Drive mode: PID control mode, output is DC 3-32V

11. Timer: From 0 seconds to 9999 hours (with selectable settings for hours, minutes, and seconds), the temperature will start timing and the heating and power supply will stop when the time is up

12. Heater: U-shaped stainless steel heating tube

13. Install fixed anti vibration rubber seat at the bottom of the machine

4Photovoltaic Glass Heat (Moisture) Resistance Test ChamberSafety protection device

1. When the control system detects the action of the following protective devices (single row), it should be able to automatically cut off the entire system and provide an alarm prompt

2. Overtemperature protection device

3. Non fuse switch overload protection

4. Heater short circuit

5. Water shortage protection device

6. Line fuses and fully sheathed terminals

5Photovoltaic Glass Heat (Moisture) Resistance Test Chamberafter-sales service

1. If the product cannot function properly due to manufacturing quality issues within twelve months from the date of shipment, provided that the user complies with the product installation and usage rules, our company will provide free maintenance for the user

2. For products outside the warranty period, our company provides long-term technical services

3. After sales service response time: within 24 hours