Pipe type water flow rate pressure flow resistance testing machine

Pipe type water flow rate pressure flow resistance testing machine

1Pipe type water flow rate pressure flow resistance testing machineProduct Introduction:
This machine adopts high-precision pressure and flow sensors, and uses mechanical devices in conjunction with our independently developed dual pressure control system to form the control core, resulting in high pressure control accuracy and the ability to test high demand pressure and flow products.

2、 Equipment features:

1. By adopting standardized and modular design, functional expansion can be carried out on the basis of this machine in the future, saving equipment investment in the later stage.

2. The equipment can meet customer requirements.

3. High intensitySUS304Stainless steel body, rust free and durable.

4. The device has a small size, occupies a small space, is equipped with casters, and can move freely.

5. Compared with similar equipment in the past, the preparation time has been greatly reduced, allowing for rapid testing.

6. The power consumption of the device is low, and compared with the same industry, the power consumption of the device is reduced1/5~1/4Save on usage costs.

7. AdoptingPLCIndustrial control systems can run for a long time and reduce maintenance costs.

8. High degree of automation, setting parameters on the touch screen to reduce manual device adjustments.

9. Equipped with fault alarm function, automatically saving test data in case of faults
3、 Reference standard: (according to customer requirements)
Flow resistance test requirement: Pass in50%Volume concentration of ethylene glycol aqueous solution, inlet temperature is15℃±1℃, flow rate is10±0.5L/minTesting under specific conditions5minAfterwards, the flow resistance is ≤40KPaWe need100%Testing;

4、 Working principle:

Inject a constant temperature and current ethylene glycol aqueous solution into the test product through a water pump, and test its stability5minAutomatically collect the pressure difference between incoming and outgoing products.
5、 Technical parameters:

1. Chassis material: Made of inner and outer stainless steel（SUS304）Made into
2Design workstation:1station

3. Water temperature:5~80℃ temperature can be set and controlled by oneself (with refrigeration unit)

4. Water pressure:0~0.5MPaAdjustable (automatic adjustment)

5. Pressure accuracy: ±0.2%FS

6. Flow resistance display range:0~200Kpa

7. Flow range:3.5~25L/min

8. Flow testing accuracy: ±0.5%
9Testing product installation method: manual installation

10. Working voltage: single-phaseAC380V, with grounding

11. Maximum power:9.5KW
12Control system:PLC+7Inch human-machine interface
13Water supply pipeline: composed ofSUS304#Stainless steel andPVCconsist of

14Dimensions: Approximately long1500mm*wide1200mm*tall1800mm

VIafter-sale service:

The equipment quality assurance period is within 12 months from the date of acceptance; During the warranty period of the equipment, if the product malfunctions due to its own quality reasons while complying with the storage, use, and installation rules, the supplier shall send personnel to repair it on-site, and all repair costs incurred shall be borne by the supplier. If the equipment is damaged or cannot function properly due to improper operation by the user of the demand side, all expenses incurred shall be borne by the demand side; Outside the warranty period, the supplier guarantees long-term technical and maintenance services to the purchaser, and charges fees at their discretion.