Polaris 6GPS Inspection Device

Fixed-point inspection mode

When conducting long-term inspections or large-scale inspections, there are some locations and equipment that must be inspected, and installing ordinary inspection points will increase the difficulty and cost of construction. So the GPS inspector has added a fixed-point mode. At the location to be inspected, the GPS inspector first collects the latitude and longitude information of the location, and then edits and processes this information through software before downloading it to the GPS inspector. This way, when the inspection arrives at the location, the location name will be directly displayed.

Trajectory inspection mode

The GPS inspection device will collect latitude and longitude information at intervals (adjustable) during the user's line inspection process. These latitude and longitude information will form the trajectory of the line inspection. The management center needs to check whether the inspection personnel are inspecting the line according to the prescribed route to complete the assessment of the inspection personnel. The trajectory inspection mode solves the installation of a large number of sampling and patrol points.

Card reading mode

Indoor inspections do not have GPS signals. In order not to affect the need for simultaneous indoor and outdoor inspections, the GPS inspection device has added a card reading function. Install patrol points in indoor areas that need to be inspected, and use a GPS patrol device to read the card at each location. The patrol device will automatically record the location name and the time of arrival.

Every picture
They are all the most direct persuaders

In traditional inspections, managers are unable to understand the situation of the inspection site (equipment aging, accidents). In order to achieve effective supervision of the inspection process, the camera function of GPS inspectors solves such problems. Equipped with a 5-megapixel autofocus camera, it can capture photos with a resolution of up to 1024 * 768 without distortion when zoomed in. Managers can have a thorough understanding of the inspection equipment and line conditions through detailed photos.

Low battery alarm

In many missed inspection records, the inspection personnel told their superiors that the reason was that the inspection device had run out of power. In order to avoid such problems, the Jinwanma GPS inspector has pioneered a low battery alarm function. When the inspector's battery level drops to 15% (when the inspector displays a red battery level), the inspector will vibrate to prompt the user to charge in a timely manner. At the same time, the inspector will automatically send an alarm data to the management center. After seeing the low battery alarm, the management center can remind the user to charge in a timely manner through the phone again. After the low power prompt, the inspection device can continue to work for 4 hours.

SOS alarm

During the inspection process, inspectors may encounter safety accidents or personal safety threats. The design of SOS alarm is to ensure the safety of inspectors. When encountering dangerous situations, inspectors can trigger the SOS alarm button with one click. Managers can receive alarm calls, and the management center can receive alarm data. At the same time, the management center will push APP alarm information to the management.

emergency
First time knowledge

The design of the call function enables inspection personnel to report the on-site situation to their superiors in a timely manner when encountering emergency situations, and managers can also make correct commands in a timely manner, thereby minimizing accident losses. By downloading 10 fixed sets of phone numbers (expandable) through software, the inspector can only make phone calls to pre stored numbers. Similarly, only the pre stored 10 sets of phones can make calls to this patrol machine, which can effectively save phone costs and avoid harassing calls. The Polaris 6GPS inspection device can also pre store 10 sets of SMS, and can download 10 SMS contents in advance according to management needs, which can be used to reply to the management center. The short message function is mainly used for the management center to issue notifications, facilitating timely understanding of the unified arrangements of the management center.