Portable SOE tester model: M117516-M64

Portable SOE Tester/Multi functional SOE Tester (64 channels, SOE time testing) (Chinese and Western equipment) Model: M117516-M64 Library Number: M117516 View HH Multi functional SOE Tester Model: M117516-M64 (1) Multiple modes of SOE routine testing functions: sequential triggering, reverse triggering, group triggering; （2） Special testing functions: switch protection circuit delay time test, analog protection circuit delay time test, setting 4 DB37 (8 × 16 channels) and 8 4mm banana DO interfaces, adding trigger output mode to meet the requirements of tested SOE cards in different DCS systems （3） Two types of power supply: (1) external AC 220V 50HZ (2) built-in high-performance lithium-ion battery 14.8V3AH, can work continuously for more than 12 hours, both types of power supply can be used separately. （4） Has strong EMC electromagnetic compatibility, resistance to magnetic/electric field interference, and surge resistance The multifunctional SOE tester is a testing device used to verify the accuracy of SOE system recording. The basic testing principle is to trigger the SOE module with a set of standard switch signals (with accurate arrangement order and time interval), and verify the accuracy of the SOE system records by comparing the differences in sorting and time interval between the SOE system trigger records and the standard signals. The multifunctional SOE tester uses a quartz crystal oscillator source and a microprocessor to output a time base. The interval time of the output sequence signal can be set arbitrarily between 0.1ms and 999.9ms. Output as a photoelectric isolated non-polar analog contact. Touch sensitive color LCD display screen, portable carrying case, built-in high-capacity lithium-ion battery pack, can work continuously for more than 12 hours without external power supply, and can be brought to any site for use. The tester is easy to operate. No training required, testing work can be completed with just one click.Parameter 1. Functional purpose: To test the channel performance of the SOE module. 2. Operating environment temperature: -10~50 ℃. (Working environment) Humidity: 20% to 85%. (Work environment) 3. MainParameter Table Serial Number Name Parameter Value 1 Output Channel 64 Channel 2 Random trigger mode sequential trigger, reverse start, group trigger 3 Trigger duration 1ms-9999ms 4 Trigger interval 0.1ms-999.9ms (adjustable in 0.1ms units) 5 Unlimited repetition times 6 Time base accuracy ± 2us (1ms adjacent channel interval test) 7 Switching output 1 channel (DO non-polar contact, load capacity: DC300V/100mA) 8 Switching input 1 channel (DI dry contact type) 9 Analog output 1 channel (AO 4-20mA) 10 Analog input 1 channel (AI 0-5V) (when inputting 4-20mA signal, an external 250 ohm standard resistor is required) 11 Open circuit withstand voltage 0-300V V (Is=0.5uA) 12 conduction voltage drop less than 3V (If=100mA) 13 current capacity ≤ 150mA (Vs=2.4V) 14 isolation characteristics 1500V (between DO channels) 15 stability better than 20ppm 16 The built-in power supply meets the requirement of continuous working time not less than 8 hours, 17 power consumption<10w, 18 power supply 12.6V, 3AH lithium-ion battery or AC220V 50Hz, 19 external dimensions: 443X301X175mm, 20 machine weight: 4.0kg, switch output channel characteristics: project specification value, testing conditions, open circuit withstand voltage 0-300V, Is=0.5uA, conduction voltage drop less than 2.6V, If=100mA, current capacity ≤ 150mA, Vs=2.4V, isolation characteristics, 1500V, DO channel. Note: When the testing device is powered off, all contacts are in an open circuit state. The multi-functional SOE tester has a total of 4 DB37 output sockets. Each socket contains 16 output channels, for a total of 64 output channels. The correspondence between the internal pins and channel numbers of each DB37 socket. T1-T4 are DB37 connector sockets. Each socket contains 16 output channels. The triggering output sequence is T1-T4, while each output socket is triggered in the order of 1-16. In this way, there are a total of 64 output channels, and the triggering interval time between any adjacent channels is consistent. Product List 1 SOE Tester (Main Unit) Platform 1 2 Matching Test Line (Including Cable Package) Set 1 3 Matching Charger (1A) 1 4 One letter screwdriver handle 1 5 Product User Manual 1 6 Product Qualification Certificate 1