Portable total hydrocarbon/methane/non methane total hydrocarbon analyzer

3010HFIDPortable total hydrocarbon/methane/non methane total hydrocarbon analyzerThe use of a heated flame ionization detector (HFID) to measure total hydrocarbons (including THC, VOC, TOC, NMHC) is a standard measurement technique that complies with regulations.
QUAL1 BS EN 12619:2013 USA EPA 40 CFR Part 60 Method 25 USA EPAPart 503 Applications Passed the type approval certification of Chinese measuring instruments, certification number: CPA2015-C174
Suitable for VOC monitoring of organized emissions and various industrial pollution sources. High strength corrosion resistance, anti-interference, high measurement accuracy, fast response. High temperature analyzer and insulation heating pipeline ensure sample quality.
The 3010HFID portable total hydrocarbon analyzer adopts a heated hydrogen flame ionization detector. It is a classic method for measuring total hydrocarbons (THC, VOC, TOC, NMHC), and the advantage of this method is that it can accurately measure hot/humid sample gases. The entire sampling and analysis process is kept at high temperature (191 ℃), which can effectively prevent the loss of hydrocarbons caused by the condensation of high molecular weight hydrocarbons in the injection pipeline. This method is sustainable for detection and has a fast response time, making the monitoring and real-time reporting of alarm status of the instrument very effective.
3010HFIDPortable total hydrocarbon/methane/non methane total hydrocarbon analyzerThe scope of application is very wide, such as boiler flue gas detection, incinerator flue gas detection, and volatile organic solvent leakage detection. 3010HFID has a good correlation with lipids, alcohols, esters, ketones, and aromatic compounds, and is a reliable classical method for detecting total carbon and hydrogen concentrations.

Measurement principle
It is a flame generated by the combustion of hydrogen and air as energy source. When organic compounds enter the flame generated by the combustion of hydrogen and oxygen, chemical ionization occurs at high temperatures, producing ions several orders of magnitude higher than the base flow. Under the directional action of a high-voltage electric field, an ion flow is formed. The weak ion flow is amplified by high resistance to obtain an electrical signal proportional to the amount of organic compounds entering the flame, and the organic matter is quantitatively analyzed based on the size of the signal.

1. Comprehensive Emission Standards for Air Pollutants (GB16297-1996)
2. Emission Standards for Odor Pollutants (GB14554-1993)
3. Emission Standards for Air Pollutants from Coke Oven (GB16171-1996)
4. Emission Standards for Cooking Fumes in the Catering Industry (GB18483-2001)
5. Emission Standards for Air Pollutants from Oil Storage Tanks (GB20950-2007)
6. Emission Standards for Air Pollutants from Gasoline Transportation (GB20951-2007)
7. Emission Standards for Air Pollutants from Gas Stations (GB20952-2007)
8. Pollutant Emission Standards for Synthetic Leather and Artificial Leather Industry (GB21902-2008)

【 Application Scenarios 】
1. Automobile exhaust emission environmental monitoring station, universities, research institutions, laboratories, etc
2. Catalytic conversion and thermal combustion testing
3. Engine combustion efficiency testing and emission monitoring
4. Process monitoring
5. Optimization and emission testing of industrial boiler renovation
6. Natural gas leak detection
7. Semiconductor Electronic Device Products Factory
8. Tobacco industry
9. Plating and paint spraying workshop
10. Solvent incineration and absorption

The instrument uses the High Temperature Hydrogen Flame Ionization (HFID) method to detect the sample gas. In order to minimize the impact of sample gas condensation on measurement accuracy, the instrument samples at a high temperature of 191 ℃ throughout the process. At the same time, a compensating air bypass system is used to prevent sample gas condensation at the back pressure regulator.
3010HFID has an ignition/shutdown optimization scheme design. Ignition: When the combustion measurement chamber and heating pipeline reach above 130 ℃, the flame ignites and the sample gas is introduced. Shutdown: As soon as the FID flame is extinguished or the fuel source is turned off, the built-in sensor will immediately shut off the corresponding electromagnetic control valve.
The instrument is equipped with a carbon washer and a built-in air filter to ensure the provision of clean and hydrocarbon free combustion gas and zero gas. The heating pipeline of 3010HFID is integrated and controlled by the analyzer host, without the need for additional temperature control units and power supplies.

[Advantages]
1. Easy to operate
2. Equipped with carbon washing
3. MCERTS certification
4. Certified by CPA
5. Small size, sturdy and durable
6. Integrated heating sampling pipeline
7. Compliant with EU and US EPA regulations
8. Removable PTFE sample gas filter
9. Built in air catalytic converter
10. Built in data logger
11. Sample gas pressure regulator provides high stability sample gas flow rate
12. Oxygen synergy function avoids the influence of flame temperature changes on measurement

[Optional]
The software can be used for data collection, data monitoring, and providing detection reports. 3010HFID is equipped with methane detection and non methane alkane detection, with output options of methane/non methane.