Position type axial flow fan, fixed industrial strong exhaust fan

Position type axial flow fan, fixed industrial strong exhaust faninstall

1. Before installation, the fan should be carefully inspected for any damage or deformation. If there is any damage or deformation, it should be repaired properly before installation can proceed.

2. During installation, pay attention to checking whether the connecting parts are loose, and the gap between the blades and the air duct should be uniform and not collide.

3. The weight of the connecting air duct should not be borne by the fan duct, and additional support should be added during installation.

4. The air outlet of the fan must be equipped with a collector, and it is recommended to install a protective net.

5. The fan base must be naturally connected to the foundation plane, and it is not allowed to forcefully connect the base by knocking it to prevent deformation. During installation, the base should be calibrated, iron pads should be added, and the basic horizontal position should be maintained. Then, the anchor bolts should be tightened.

6. After installation, progressiveness test must be carried out. After normal operation, it can be put into formal use.

Installation instructions:

1. Before installation, the fan should be carefully inspected for any damage or deformation. If there is any damage or deformation, it should be repaired properly before installation can proceed.

2. During installation, pay attention to checking whether the inferior parts are loose, and the gap between the blades and the air duct should be even and not collide.

3. The weight of the connecting air duct should not be borne by the air duct of the fan, and additional support should be added during installation.

4. A collector must be installed at the air outlet of the fan, and a protective net must be installed.

5. The fan base must be naturally connected to the foundation plane, and the base must not be forcibly connected by knocking to prevent deformation. During installation, it should be calibrated

6. Install shims on the machine base, maintain a horizontal position, and then tighten the foundation bolts.

After installation, experiments must be conducted first, and formal use can only be allowed after normal operation.

Maintenance and upkeep:

Users should do a good job in daily maintenance and upkeep of the fan to ensure its normal and safe use. It is recommended to pay attention to checking:

1. Is the air flowing through the fan clean and dry, without impurities or excessive water vapor.

2. When the fan is idle for a long time and reused, it must be checked whether the connecting parts are firm and reliable, whether the rotation is flexible, and tested before it can be officially used.

3. Pay attention to whether there is any abnormal sound or increased vibration during the operation of the fan in daily life. If any abnormal situation is found, stop the machine for maintenance in a timely manner.

4. The dust and dirt on the fan blades should be cleaned in a timely manner.