Power video 2-in-1 monitoring dedicated lightning arrester

NegotiableUpdate on 04/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Comprehensive protection for camera power supply and video signal, with minimal interference; High traffic volume and low residual pressure; Multi level protection with low insertion loss, excellent transmission performance, and no leakage current; Easy installation, rigorous structure

Product Details

basic descriptionBasic description-Heavenly Shield-

The power video 2-in-1 monitoring dedicated lightning protection device is a customized lightning protection product for analog video signal cameras, which protects the camera power and video lines from the effects of lightning electromagnetic pulses, induced overvoltages, and operational overvoltages. It is widely used in public security, traffic monitoring, and other fields. This series of products has the characteristics of high integration, low insertion loss, low residual voltage, and easy installation, and has good lightning protection effect.

Application scenariosApplication scene-Heavenly Shield-

01Used for the protection of monitoring equipment (power supply, camera) in the monitoring system;

02Used for bank monitoring system

03Community security system

04Monitoring equipment for schools, enterprises, road safety protection, etc

Technical Parametertechnical parameter-Heavenly Shield-

model Indicator	power supply +Video	M10-12/D12BM	M10-24/D12BM	M10-220/D12BM
Video section
Working voltage Uc	12V
Nominal discharge currentIn	3kA（8/20μs）
Maximum flow capacityImax	5kA（8/20μs）
response timeTa	1ns
insertion lossAe	0.5dB
Joint form	BNC
Power supply section
Working voltage（Un）	12VDC	24VAC	220VAC
Nominal discharge current（In）	5kA（8/20μs）
Maximum flow capacity（Imax）	10kA（8/20μs）
Protection level (in, 8/20 μ s)Up	60V	100V	900V
Joint form	Crimping type
Dimensions (excluding grounding wire)	1126025mm
Protection level	IP20

installation diagraminstallation diagram-Heavenly Shield-

1. Prepare one power cable, one pan tilt signal cable/video cable/network cable respectively, for connecting the lightning arrester and the camera

2. Fix the lightning arrester inside the waterproof box

3. Complete the connection between the lightning arrester power supply, signal output port, and camera

4. Connect the power supply and signal input ports of the lightning arrester to the monitoring center or optical transceiver

安装示意图

Power+Video: M10-12/D12BM M10-24/D12BM M10-220/D12BM