Q10-1W electric actuator

1Q10-1WElectric ActuatorProduct Display

IIQ10-1WElectric ActuatormanufacturerOverview

In stockQ10-1W, Q20-1W, Q30-1W valve electric device manufacturers, Bell Company is a physical manufacturer, and a large number of spot orders are welcome. The multi turn valve electric device, abbreviated as Z-type electric device, is a driving equipment for valve opening, closing, or regulating control. Z-type electrical installation is suitable for gate valves, globe valves, diaphragm valves, plunger valves, throttle valves, water gates, etc. Can be used for both open stem valves and concealed stem valves.

This series of electrical installations has the characteristics of comprehensive functionality, reliable performance, advanced control system, small size, light weight, and easy use and maintenance. Valves can be remotely controlled, centrally controlled, and automatically controlled. Widely used in industries such as power, metallurgy, petroleum, chemical, papermaking, and wastewater treatment.

IIQ10-1WElectric ActuatormanufacturerModel representation

IIIQ10-1WElectric Actuatormanufacturerconnection size

4Q10-1WElectric ActuatormanufacturerTravel control mechanism

Adopting the principle of decimal counter, also known as counter, with high control accuracy, the structure is shown in the figure7. Its working principle is that a pair of large and small umbrella gears inside the gearbox drive the intermediate transmission small gear, which in turn drives the stroke control mechanism to work. If the stroke controller has been adjusted according to the position of the valve opening and closing, when the controller rotates with the output shaft to the pre adjusted position (number of turns), the cam will rotate 90 °, forcing the micro switch to act, cutting off the power supply of the motor, and stopping the motor, thereby achieving control over the stroke (number of turns) of the electric device.

note1: To control valves with a large number of turns, the cam can be adjusted to rotate 180 ° or 270 ° before pressing the micro switch.