-
E-mail
qiuriheng@163.com
-
Phone
13691762133
-
Address
3rd Floor, Building 1, No. 35 Guanlan Avenue, Longhua New District, Shenzhen
Product Categories
Shenzhen Xinchuangyi Technology Co., Ltd
RFID Southern Power Grid Inspection Label
NegotiableUpdate on 04/11
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Product parameter advantages, characteristics, and application areas: RFID Southern Power Grid inspection tags mainly adopt special antenna design and are encapsulated in ABS engineering plastic, which can effectively prevent metal interference with RFID signals, enabling tags attached to metal to achieve good reading performance, even at a distance farther than reading in the air
Product Details
- Product parameters
- Advantages and Characteristics
- application area
The RFID inspection tag of Southern Power Grid mainly adopts a special antenna design and is encapsulated in ABS engineering plastic, which can effectively prevent the interference of metal on the radio frequency identification signal, enabling the tag attached to the metal to achieve good reading performance, even farther than reading in the air. This product is waterproof, acid resistant, alkali resistant, and collision resistant, and can be used outdoors. We can install this tag on fixed assets on metal or non-metal surfaces, install RFID recognition devices at entrances and exits, and combine it with a real-time monitoring platform for data center assets to achieve comprehensive visibility and real-time information updates of assets, and monitor their usage and flow in real time.
Technical Parameter
Operating Frequency
(American Standard)902-928MHz,(european standard) 865-868MHz
Protocol standards
EPC Class1 Gen2, ISO18000-6C
Scan Distance
10m - (American Standard) 902-928MHz,Metal surface;6m - (American Standard) 865-868MHz,Non metallic surfaces
12m - (American Standard) 902-928MHz,Metal surface;9m - (American Standard) 865-868MHz,Non metallic surfaces
chip type
Alien H3
Chip capacity
EPC:96bit(Encodeable) USERdistinguish:512bit(readable and written)
rewrite cycle
10one million time
Data Storage
50year
Physical parameters
Appearance color
Green (red, black, green, white)
Encapsulant
ABS
Product size
132mm*22mm*16mm
Product weight
18g
Installation method
Screws and rivets
protection grade
IP68
Product packaging
100pcs/box
Environmental parameters
operation temperature
-30℃~+85℃
storage temperature
-40℃~+230℃
Working humidity
＜95%
1. Operating frequency of RF tag
The working frequency range of RF tags is 860 MHz -930 MHz. The tag chip contains an automatic tuning mechanism, which makes the electronic tag more stable in commonly used media environments and has excellent environmental adaptability.
2. Memory area of RF tag
The memory area of the RF tag should include a tag identification area (TID area), an item identification area (EPC area) of no less than 128 bits, a user data area (User area) of no less than 512 bits, and a reserved area (Reserved area) of 64 bits.
Unique identification of 3 RF tags
The working frequency range of RF tags is 860 MHz -930 MHz. The tag chip contains an automatic tuning mechanism, which makes the electronic tag more stable in commonly used media environments and has excellent environmental adaptability.
2. Memory area of RF tag
The memory area of the RF tag should include a tag identification area (TID area), an item identification area (EPC area) of no less than 128 bits, a user data area (User area) of no less than 512 bits, and a reserved area (Reserved area) of 64 bits.
Unique identification of 3 RF tags
The TID area of the RF tag should contain the unique identifier of the tag.
Basic functions of RF tags
Supports all mandatory and access commands of ISO/IEC 18000-6 Type C. Meet the multi label anti-collision requirements of ISO/IEC 18000-6 Type C. This electronic tag has high read and write efficiency, advanced data integrity and error detection capabilities. In addition, it contains anti-collision mechanisms and self suppression functions for read tags, which perform better than general electronic tags in multi tag recognition applications.
5 Data Security
Supports all mandatory and access commands of ISO/IEC 18000-6 Type C. Meet the multi label anti-collision requirements of ISO/IEC 18000-6 Type C. This electronic tag has high read and write efficiency, advanced data integrity and error detection capabilities. In addition, it contains anti-collision mechanisms and self suppression functions for read tags, which perform better than general electronic tags in multi tag recognition applications.
5 Data Security
Support locking, unlocking, and deactivation functions. The RF tag can be set with a 32-bit access password and a 32-bit kill password. The access password and deactivation password should support permanent locking, which means they are not readable or writable. The TID (96 bit) area should be permanently locked and cannot be unlocked. The UII and User areas support locking and unlocking functions and meet the corresponding requirements of ISO/IEC 18000-6 Type C.
6. Encoding and storage of RF tags
Print the corresponding Code39 barcode and related identification information on the front of the label. The data written into the RF tag should be consistent with the barcode encoded data printed on the front of the paper and the characters for human recognition.
The barcode number is the asset number of the electrical equipment, and the EPC of the electronic label is set as the asset number of the electrical equipment.
The unique identification information of the TID area of the tag can be associated with the asset number written in the EPC area and archived to increase anti-counterfeiting performance.
7. Material of RF tags
The label surface material is made of PET material.
8. RF tag read and write frequency
More than 100000 times
9. Storage time of RF tag data
More than 20 years
Print the corresponding Code39 barcode and related identification information on the front of the label. The data written into the RF tag should be consistent with the barcode encoded data printed on the front of the paper and the characters for human recognition.
The barcode number is the asset number of the electrical equipment, and the EPC of the electronic label is set as the asset number of the electrical equipment.
The unique identification information of the TID area of the tag can be associated with the asset number written in the EPC area and archived to increase anti-counterfeiting performance.
7. Material of RF tags
The label surface material is made of PET material.
8. RF tag read and write frequency
More than 100000 times
9. Storage time of RF tag data
More than 20 years
Application areas:
1. Asset management and tracking of IT servers and equipment;
2. Outdoor power equipment inspection, tower and pole inspection, elevator inspection, pressure vessel, steel cylinder, gas cylinder, and oil and gas pipeline management;
3. Factory equipment management, product tracking, and automotive component process management;
4. Tracking of recyclable transport items such as pallets, containers, and handbags;
5. Warehouse management application that can identify individual shelves and remotely read them through a reader
